Plant Liquidations

Featuring the Following Tube Mills:

4" x 4" x .200" Yoder M3.5 Form Square / Weld Square Pipe Mill (Installed with Tooling)

2" x 2" x .135" Yoder Form Square / Weld Square Pipe Mill (Installed with Tooling)

2 1/2" x .134" Yoder W2.5 Complete Tube Mill Line (New Welder 2018, New Cut Off 2019) Installed with Tooling

2" x .075" Yoder M2 Complete Tube Mill Line(New Welder 2018, New Cut Off 2019) Installed with Tooling

60" x .250" x 50,000lbs Loopco Loop Slitting Line

All Equipment its Installed and can be seen Running
Tube Mills Can be Sold as a Lot or Individual

Featuring the Following Equipment:
-Batch Annealing Furnaces with Currently (12 Bases Operating) and Installing 3 NEW Bases (Rad-Cons) with a total of 5 bases to Install
- 84" x 1/2" Cut to Length Line with 1" Shear and a Stand by 1" Shear
-24" Cold Reversing mill with AGC system gauge range .012" to .187"
- 60" Cincinnati Slitter .020" to .250"
- 24" Cut to Length line .020" to .187"

Complete Business housed in a 95,000sqf Overhead Craned Building Located in the Heart of Industrial Mid West

Featuring Highly Trained and Skilled Workforce, complete office support staff, Plant Support equipment, etc.

- AUTOMATIC BARS FEEDER MEGAGENIUS CONTROL 14 SCHNELL
- AUTOMATIC CUTTING MACHINE SHEAR LINE 300 SCHNELL
- SEMIAUTOMATIC CUTTING MACHINE OPTIBAT-100T 3 12 M SCHNEL
- SEMIAUTOMATIC CUTTING MACHINE BAT-65 SCHNELL
- AUTOMATIC DOUBLE BENDING MACHINE ROBOMASTER 60 /12 SX SCHNELL
- AUTOMATIC DOUBLE BENDING MACHINE ROBOMASTER 60 / 12 SCHNELL
- AUTOMATIC DOUBLE BENDING MACHINE ROBOMASTR 40 / 12 SCHNELL
- STRAIGHTENED REBAR TIPPER
- AUTOMATIC STIRRUP BENDER COIL-18 BE ELDGT SCHNELL
- AUTOMATIC STIRRUP BENDER WITHOUT STRAIGHTENING PRIMA-16 SCHNELL
- AUTOMATIC STIRRUP BENDER WITH STRAIGHTENER PRIMA-16 SCHNELL
- AUTOMATIC STIRRUP BENDER FORMULA 12 HS VG SCHNELL
- AUTOMATIC STIRRUP BENDER FORMULA 12 HS VG SCHNELL
- AUTOMATIC STIRRUP BENDER FORMULA 12 HS C.C.O. SCHNELL
- AUTOMATIC STIRRUP BENDER PRIMA 12 VG R SCHNELL
- BENDING BENCH WITH TWO BAR BENDING MACHINES P P-42 EXPORT
- BENDING BENCH WITH TWO BAR BENDING MACHINES P P-42 EXPORT
- BAR BENDING MACHINE P-42 EXP SCHNELL
- BAR BENDING MACHINE P-42 EXP SCHNELL
- RING BENDING MACHINES
- REBAR CUTING MACHINE SHEAR C-50 EXPORT SCHNELL
- COIL FLIPPER SCHNELL
- COIL FLIPPER
- 4 THREADING MACHINES JBG 40 D

Production Capacity (3 Shifts per Day) Up to 400 Tons per Month
Plant is tooled to manufacture Tubing from 5/8” to 10” Diameter Range and Lengths of up to 42’
Schedules
5 (1/2” to 10”)
10 (1/8” to 48”)
40 (1/8” to 6”)
80 (3/8” to 2”)

The plant is ASTM (American Society of Mechanical Engineers) Certified to manufacture the following Tubing:
A-249, A-269, A-270, A-312, A-358, A-450 and A-530
Also, certified with the strict ASME BPV Quality Code

11,000 square Meters of Total Plant Space which 6,000 square meters are Dedicated for Production
Used to employ over 30 workers

Serviced 7 Key Industries:
1- Food and Beverage (Coca Cola, Nestle, etc)
2- Chemical Industry
3- Ornamental Industry
4- Mining
5- Petroquemical
6- Sugar
7- Paper

The Plant Features the Following Machinery:

• (5) Tube Mills:
- 10” x .135” Demag Tube Mill
- 3” x .135” Olympia 80 Rafted Laser Tube Mill (2010)
- 2 ½” x .135” Keller Tube Mill
- 2” x .104” Cantilever Style Tube Mill
- 1 ½” x .104” Keller Tube Mill

• Off Line Squares Polishing Machine (Home Made) Ranges ¾” to 2” x 2”
• Off Line Round Polishing Machine From ¾” to 10”
• Garboli (2015) Fine Square Polishing Machine (3 polishing Heads)
• Off Line Annealing Oven (1060 degrees)
• Push Pointer
• Drawn Over Mandrel Stretch Reducer
• 5 Roll Wyko Pre-Straightener
• 2 Roll Straightener for 1 5/8” to 2” Diameter
• 5 Roll Straightener for 2” to 10” Diameter
• Pickling Line (Batch Pickle)
• Hydrotester 110 PSI
• Complete Machine Shop

Product Mix:

Round Round Square Rectangular
3/4"
1" 1.315" 3/4" X 3/4"
1 1/4" 1.660" 1" X 1"
1 1/2" 1.900" 1 1/4" X 1 1/4" 40 mm X 20mm
2" 2.375" 1 1/2" X 1 1/2"
2 1/2" 2" X 2"
3"

3.5" 5.563"
4" 6.625"
4.5" 8.625" 4" X 4"
10.750"

Complete plant Featuring the following Equipment:
-60” x .104” x 60,000lbs Pro –Eco Cut to length line
Featuring:
5-HI high leveler
Cut lengths up to 16 feet
Gauge range of .008 - .125

-60” x .250” x 40,000lbs Paxson slitter
Dual Driven head loop pit slitter drive
Thickness range from .008 to .250”
Coil capacity to 40,000pounds
All shim less tooling
Banding Line
Slit widths from .750 to 60.00 inches

-36” Paxson Slitter
Driven head loop pit slitter drive
39” wide coil capacity
Gauge range .006 to .055
Coil weights to 30,000 pounds
All shim less tooling slit widths .750 to 39.00 inches

Slit widths available down to .500 inches.
Cranes form 15 ton to 100 ton
Forklifts from 4,000 pound to 30,000 pound capacity

Building Details:
165,000 square feet
Heated
Air rotation units and ceiling fans to keep the air moving at all times
Two loading docks
Drive thru doorway
Rail Siding
Seven overhead cranes ranging in capacity from 15 ton to 100 ton!
35’ Clearance Under the Hook

The total area of the building is 170,000 square feet (Currently 15,000 square feet in under lease until May of 2023) leaving 155,000 square feet available immediately.

The building has driveways that run through the building at both the east and west ends. There is a back in doorway located in the center of the north side of the building.

There are 2 loading docks.

Norfolk & Southern has a rail siding under crane at the west end of the building. There is also an out- door loading ramp for loading and unloading boxcars.

The building has 7 overhead cranes. 2- 100 ton with 20 ton auxiliary hoists, 3- 25 ton with 5 ton auxiliary hoists and 2- 15 ton.

Power is 480V, 3,200 amps. Additional power is available if needed

There are three office areas totaling 7,500 square feet. There is space that can be developed for additional office space if needed.

There is an outer building of 4,000 square feet.

Complete Plant for sale Featuring:
76mm x 2mm Rafted 80 Laser Stainless Steel Tube Mill Line
104mm x 6mm SMS Demag Stainless Steel Tube Mill Line
52mm x 2mm Abbey Etna Stainless Steel Tube Mill Line
76mm x 2mm Yunion (Taiwan) Stainless Steel Tube Mill Line (2007)
504mm OD x 3mm Wall Spiral Weld Tube Mill
Complete Plant Tooled to produce the following Tube Sizes:

LASER DEMAG WITH BEADROLLER ABBEY WITH BEADROLLER UNION SPIRAL
1mm-2mm 1mm-5.5mm 1mm-2mm 1mm-2mm 1.5mm-3mm
31.8 50.8 18 25.4 76.2
33.4 52 22 28 88.9
35 63.5 19.1 31.8 101.6
42.7 70 25.4 38.1 104
48.3 73 28 40 114.3
50.8 76.2 31.8 41.2 129
57.2 85 34 44.5 154
60.3 88.9 38.1 52 168
70 101.6 40 57.2 204
76.2 104 42.7 60.3 219
44.5 63.5 254
50.8 70 273
52 76.2 304
85 324
88.9 354
406 x 3
457 x 3
508 x 3

All Off-Line Ancillary Equipment:
6 Roll Bronx Tube Straightener
(2) CMA OD Stainless Steel Polishers for Finishing / Buffing
4 Head Hydrotester

Description
20" - 130" x 1" WT Helical Seam Pipe Manufacturing Plant
API-5L X80, ISO 9001
4.3 Million square feet
392,324 square feet steel buildings with 10 overhead cranes and railway spur

Featuring:

(2) identical and highly rigid Blohm & Voss Helical Seam Pipe Mills
Rrefurbished with state of the art German technology - last upgrade in 2015
API 5L X80, 20”- 130” (3,300mm) diameter x up to 1” Wall Thickness x up to 82’ long
88,000# Coil Weight
Tandem Fly Welding System
Flux Heating and Handling System
Automatic Welding Gap Control
Laser Controlled Strip Edge Tracking System
High Efficiency Plasma Cutting
2012 German Astral Main Drive
(2) German PWS Strip Edge Milling Machines with 600mm diameter 75 kW heads
(6) Pairs of Milling Heads – 2015
1500 kVA 13200/440 V Substation Transformer
Shuttlelift Coil Handling Gantry Crane
Cooling Tower

(2) Off Line German Uhrhan & Schwill Submerged Arc Welding Systems
24” - 64” diameter pipes
1500 kVA 13200/440 V Substation Transformer

Hydrotesting Machine
Up to 82’ long pipe
2400 metric ton

(2) PRD End Facing and Beveling Machines
20” – 72” Pipe Diameter

2015 Austrian Linsinger Double End Facing and Beveling Machine
20” – 60” diameter x 26’ – 82’ long

Mechanical Testing Laboratory
Tinius Olsen 100 Ton Universal Tensile Testing Machine
Leco PG35 Specimen Grinder
Tinius Olsen Impact Tester
Rockwell Hardness Tester
Charpy Specimen Grinder
High Energy Drop Weight Tester
Specimen Straightening Press

X Ray laboratory
(6) X-ray Generators:
Balteau 300 kV, (5) 2014 – 2005 Site-X: SCU288, (3) D3006, CP D200
(3) Film Processors: (2) Alpahtek AX-7000LE and Pako Guardian II
(2) Film Viewers: Luminux LH30 and Balteau 187
Xrite 301 Transmission Densitometer
NDS Products ND2000 Geiger Counter
Arrow-Tech W138 Dosimeter
NDS Products ND100 Dosimeter Gauge
Universal Tensile Testing Machine
Extensometer
Hardness Tester
Pressure Gauges
Digital Multimeter
Digital Calipers
Micrometers
Current Probes
Infrared and Contact Thermometers
Coating Thickness Gauges
Magnetic Field Meter
Light Meters

Ultrasonic Testing Equipment
Automatic and Manual
VIS/Mux 16 Channel System
2017 GE Inspection Tecnologies Krautkramer, Panametrics, and DeFelsko
Universal Fissure Detectors
Thickness Gauges
Multi-scanners
Pressure Transmitters

2011 Nordson Fusion Bonded Epoxy Powder Coating Plant
20” – 60” Pipe
163 kg/hr
48 Spraying Guns
Air Dryer
Fire Suppression System
Excel Powder Feeding System
2000# Super Sack Handling Tower
Cooling Room
Esin Cooling Towers
2012 Atlas Copco Air Compressor
1500 cfm
150 psi
250 kW
Dry Air Compressor
ISPC Wheelabrator Series 3000 Shot Blast
20” – 60” pipe
(2)100 HP Wheels
1181’ Feed Conveyor w/ Pneumatic Rubber Tire Rollers
(4) Gas Fired Furnaces
(2) 24” and 42” Pipe Bevellers

Polyurethane Coating Plant
ISPC Wheelabrator Shot Blast
5400 cubic feet/hr
20” – 140” Pipe
(2) 75 HP Wheels
5000 cfm Dust Collector
492’ Feed Conveyor w/ Solid Rubber Lined Rollers

Interior Coating Plant
2010 Selmers Shot Blast
Hydraulic
20” – 120” x 59’ Pipe
(2) Heads on Boom
Additional Supports for 32” – 120” x 30 Ton Pipe
Hydraulic Pipe Rotating and Handling System
3767 Square Feet/Hr Boom for 20"- 48"
5812 Square Feet/Hr Boom for 30" - 120"
Boom for 66" - 92" and 94" - 120"
Cartridge Dust Collector
100 cfm Filters
Dust Extraction Booths
78’ Lance for Abrasive Feed
575 kW Drive
Tube Handling Skis
Laboratory

Fusion Bonded Epoxy Powder Coating Laboratory
Thomas Scientific Microscopes
Analytical Balances and 400°C Hot Plates
Accumet Electrode
Constant Temperature Furnace
Impact Meter Hammer
Holiday Detectors
Moisture and Temperature Recorders
Adherence Tester
Magnetic Field Meter
Thickness Gauges
Differential Scanning Calorimetry Equipment

Plant Support
Atlas Copco Air Compressor
120 cfm
120 psi
Esin Cooling Tower
Video Transmission and Recording Equipment
(21) 2015 Lincoln Rx450, Rx550 and Rx555
(4) Overhead Bridge Cranes
Hércules 40 / 10 Ton
Hércules 30 / 10 Ton
20 Ton
(2) 20 Ton
(3) Mobile Cranes
Grove 2535 35 Ton
Grove Rt-655
Grove Rt 865 60 Ton
(2) Lift Trucks
2007 Caterpillar Dp150d
Hyster

Machine Shop:
CNC and Manual Vertical Milling Machines
Wire Electrical Discharge Machine
Band Saw
Welding Supplies