Equipped With
Production range
Coil width: 16” – 63” (400 – 1600 mm)
Coil thickness: 0.010” – 0.120” (0.25 – 3.00 mm)
Coil weight: 50,000# (22 tons)
Line speed: 350 fpm ( 100 meter / min)
Material
Coil type: CRC – GI (Galvanized coil)
Tensile Strength: 460 N/mm2 – Mpa (66,000 PSI)
Yield point: 355 N/mm2 – Mpa (50,000 PSI)
Production tolerances
Width Tolerance: +/- 0.125 mm maximum
Cut Angle Tolerance: 30 max
Bur Height: 0.5 mm maximum
Camber: 0.2 % maximum
Coil sizes
Coil OD: 32” – 80” (800 - 2000 mm)
Coil ID: 20” – 24” (508 - 610 mm)
Coil thickness: 0.010” – 0.12” (0.25 – 3.00 mm)
Coil weight: 50,000# (22,000 kg)
MAIN TECHNICAL FEATURES
Line speed: 350 fpm (100 meter/min)
Line direction: Right to left or Left to right
Power Supply voltage: 440V/ 50Hz/ 3ph
Compressed air pressure: 6 bar, 1000 l/min
Hydraulic oil pressure: 120 bar
Uncoiler motor: 22 kw
Slitting unit motor: 75 kw AC Siemens
Recoiler motor: 75 kw AC Siemens
Total power: Approximately 200 kW
MAIN COMPONENTS
Entry Coil Car (Pit Type)
Uncoiler with Outboard Support Arm
Coıl Peeler & Pınch Roll
Entry Crop Shear
Edge Guides
Slitter Head
Scrap Wınder
Looping Pit
Cascade Rolls
Tension Stand
Recoiler with Outboard Support Arm
Exıt Coil Car
Exıt Turnstile
Electrıcal And Electronıc Systems
Hydraulic Group
