Buy Used Machinery

Complete Spiral Pipe Plant FOR SALE

Brand
Not Specified

Model
Not Specified

Stock #
604867

Condition
Used

Year

Tube Diameter 2030 millimeters
Max. Wall Thickness 16 millimeters

Equipped With

Consisting of:

3 Spiral Pipe Mills
Hydrostatic Tester
Coating Line for Polyken YGIII & Polyken Synergy Fusion Bonded
Concrete Lining Plant

SPIRAL PIPE MIL #1

Diameter:  508mm - 2030mm
Max Wall Thickness:  16mm
Coil Width:  760mm - 1540mm
Steel Grade:  up to 350MPa @ 16mm x 1540mm
Edge Milling

Equipment list:
Pipe mill from coil box to run out table
2x Lincoln DC 1500 welders with NA-35 controllers
2x Lincoln AC 1200 welders with NA-4 controllers
Submerged arc flux delivery and recovery system
1x Hypertherm Powermax 125 plasma cutter
1x Egmont Air IPERJET DF6
Coil preparation work centre

SPIRAL PIPE MILL #6

Pipe Size Range - Ø345 – Ø812mm
Width - 450mm – 935mm
Thickness - max 9.5mm
Coil OD - max 1800
Coil ID - 760mm
Coil weight - max 11.5 tonnes
Steel grade - up to 350MPa @ 6.4x935mm (250MPa @9.5x935mm)

Equipment list:
Pipe mill from coil box to run out table
4x Lincoln DC 600 welders with 2x NA-35 controllers
Submerged arc flux delivery and recovery system
1x Hypertherm Powermax 125 plasma cutter
1x Egmont Air JETCLEAN fume extraction unit
Abus 20t/3.2t overhead gantry crane available for purchase separately.

SPIRAL PIPE MILL #7

Pipe Size Range: Ø121 – Ø345mm
Feed Coil:
Width - 250mm or 450mm dependent on pipe size produced
Thickness - max 5mm
Coil OD - max 1550
Coil ID - 508mm
Steel grade - 250MPa
Coil weight - max 6 tonne

Equipment list:
Pipe mill from coil box to run out table
2x Lincoln DC 600 welders with NA-35 controllers
Submerged arc flux delivery and recovery system
1x Thermal Dynamics – Cutmaster A120 plasma cutter

HYDROSTATIC TESTER

Pipe Size Range: Ø508mm – Ø1965mm (plane end) or Ø2100mm HSJ
Pipe Wall Thickness: 4.8mm - 16mm
Pipe Length: 6 - 12m
Test Pressure: max 20.0MPa
End Load: max 1,800 tonnes.
HSJ Dies: Die inventory to be confirmed

CONCRETE LINING PLANT

All plant purchased new or built from new and commissioned March 2012
Pipe Size Range: 426mm – 2030mm OD
Pipe Wall Thickness: 4.8mm - 20mm
Pipe Length: 6 and 12m
Pipe Weight: Max 1291Kg/M concrete lined (2030mm OD x 20mm WT x 20mm Lining) [15,492Kg per 12m length]

FUSION BONED TAPE COATING PLANT

Plant is capable of applying Polyken YGIII (cold applied) tape, and Polyken Synergy (hot applied, fusion bonded) tape in accordance with Polyken and American Water Works Association (AWWA) standards and specifications.

Polyken Synergy capability is Ø345mm – Ø1575mm (limited by reheat furnace).
Polyken YGIII capability is Ø345mm – Ø2020mm

All plant purchased new or built from new and commissioned March 2012.
Pipe Size Range: Ø345mm - Ø2050mm x 12m
Max Pipe Weight: 9.5T per 12m length
Pre-heat Furnace: Gas fired Removable insulated enclosure for pipe >Ø1575mm

Grit Blaster: Wheelabrator model EPM-84-60-M, twin turbine. Two (2), model 50 BD 210

Primer Application: Seetal fume extraction with direct drive 2.2 Kw variable pitch fan and quick-change filters. Wagner LEOPARD adhesive spray pump and associated spray guns.

Tape Application: 2x tape dispensers with tension control and application angle adjustment.

Reheat Furnace: Electric

CAN BE PURCHASED AS A PACKAGE OR INDIVIDUALLY

Join Our Mailing List

Be the first to see our new arrivals, plant liquidations, promotions and news.