Contact Galaxie
Call +1 (734) 727-0600 or send us an email.
We sell used machinery
The used metal processing machinery market is a universe ripe with uneven quality and pricing. Galaxie Corporation works with clients to eliminate this uncertainty, delivering value and predictability in meeting a client’s needs.
78" (2000mm) x 6mm x 30 Ton Fimi Loop Slitting Line with 2 Heads Year 1997
Year: 1997
Thickness Range: 2mm - 6mm
Coil Capacity: 30 Metric Ton
Entry Coil ID: 610mm - 760mm (24 - 30")
Exit Coil ID: 508mm & 610mm (20" & 24")
Max Coil OD: 2200mm (86")
Line Speed: 60 - 120 Meters/Min (200 - 400 FPM)
Complete Line F
78" (2000mm) x .500" (12.7mm) x 64,000# MINO Slitting Line
Min/Max Thickness : 3mm - 12.5mm
Coil I.D: 610mm
Coil O.D: 2,200mm
Coil Storage Ramp
Coil car
Mandrel Uncoiler
Sliding Base
Powered Hold Down Roll
Telescopic Peeler Table
Pinch-roll
Straightener
Guillotine C
72" x 40,000# Cincinnati Slitter with Strip Cleaning Section
L-Type Coil Car
Cincinnati Mandrel Uncoiler
20" to 24" Coil ID
Threading Table
Entry Pinch Rolls
Hydraulically Adjusted Entry Edge Guides
Cincinnati Slitting Head
7" Arbor Diameter
Tooling
Dual Scrap Winders
72" x .187" x 60,000# Stamco Injector Head Slitting Line
Line Installed in Plant
Coil Width - Min/Max - 12"/72"
Coil Weight - Entry/Exit - 60,000#/40,000#
Entry Coil ID - 20"-24" (30" w/ Spacers)
Entry Coil OD - 76"
Exit Coil ID - 19" Drum, 20" ID (24" w/ Spacers)
Exit OD - 72"
Line Speed - 400/1200
Line Direction - Right to Left
Coil Width - Min/Max - 12"/72"
Coil Weight - Entry/Exit - 60,000#/40,000#
Entry Coil ID - 20"-24" (30" w/ Spacers)
Entry Coil OD - 76"
Exit Coil ID - 19" Drum, 20" ID (24" w/ Spacers)
Exit OD - 72"
Line Speed - 400/1200
Line Direction - Right to Left
72" x .187" x 20,000# Universal/Bradbury Slitting Line
L-Type Coil Car
Bradbury Mandrel Uncoiler
18" to 20" Coil ID
Sliding Base
Feed Up Drive
Entry Hydraulic Peeler Table
Universal Driven Slitting Head
7" Diameter Arbor, 100 HP AC Motor with Variable Speed Drive
Scrap Winder
Exit Table
Recoile
72" x .135" x 60,000# Stamco Injector Head Slitting Line
Coil Weight - 60,000 Lbs
Line Speed - 750/1500 Fpm
Thread Speed - 50 Fpm
Line Direction - Left To Right
Entry 4-Arm Turnstile
Mandrel Uncoiler
Edge Guide
Entry Crop Shear
Two Injector Slitting Heads
(1) 60" Slitting Head
(2) 72" Slitting Head
75 Hp Motor
Spacers And Rubbers
Line Speed - 750/1500 Fpm
Thread Speed - 50 Fpm
Line Direction - Left To Right
Entry 4-Arm Turnstile
Mandrel Uncoiler
Edge Guide
Entry Crop Shear
Two Injector Slitting Heads
(1) 60" Slitting Head
(2) 72" Slitting Head
75 Hp Motor
Spacers And Rubbers
72" x .135" x 50,000# Octagon/Pro Eco Loop Slitting Line
Thickness Range: .021" - .135"
Coil Weight: 50,000#
Line Speed: 1000 FPM
Coil ID Entry: 20" - 24" & 30"
Coil ID Exit: 20"& 24"
Coil OD: 74"
2 Heads with 8" Dia Arbor Arbors
150 HP DC Slitter Head Drive
250 HP DC Recoiler Drive
En
72" (1800mm) x .500" (12.7mm) x 60,000# Stamco Slitting Line with 2 Heads
Strip Width: 20"-72" (508mm-1800mm)
Strip Thickness: .075"-.500" (1.9mm-12.7mm)
Coil ID: 20"-30" on entry, 24" on Exit (508mm-762mm on entry) (610mm on Exit)
Coil OD: 36"-80" (914mm-2032mm)
Max Coil Weight: 60,000#
Line Speed: 150 FPM (50 MPM)
4 Cuts of .375" at 80,000PSI
4
70" x .015" Kampf Precision Foil Aluminum Slitting Line (2001)
Year 2001
Aluminum Alloys: 1145, 1100,3003, 7072, 811
Temper: 0 - H19
Entry Strip Width: 25" - 69" (635mm - 1753mm)
Line Speed: 2600 FPM (800 Met/Min)
Thickness: .002" - .015" (.05mm - .381mm)
(Can Lid Stock .037" or .93mm)
Temper Dead Soft Aluminum .081" (
66" x .134" x 60,000# Pro-Eco Triple Injector Head with Turret Recoiler Loop Slitting Line
Direction Right to Left
Coil Weight 60,000# Entry and Exit
Thickness Range .015-.134"
Line Speed 500 and 1500FPM
Coil Width Range 12-66"
Coil ID 20" & 24"
Max Coil OD 72"
Complete Line Consisting of the Following Componenets:
Paper Unwin
60” x .375” x 50,000# Seco Slitting Line
Cold Rolled and Hot Rolled Steel
18-60” Strip Width
2 Speed Gear Box 200-500 FPM
L Type Entry Coil Car
50,000# Max Coil Weight
Uncoiler:
Coil ID: 23-30.5”
Coil OD: 72” Maximum
Coil Weight: 50,000# Maximum
Sliding Base
Hyd
60" x .250" x 50,000# Stamco Dual Injector Head Loop Slitting Line
Year 1994
Thickness Range: .030" - .250"
Coil Capacity: 50,000#
Line Speed: 400 / 1000 FPM
8.5" Dia Arbors
2 Injector Slitter Heads
250 HP DC Slitter DRive
250 HP DC Recoiler Drive
Scrap Choppers
Syncro-Wind Tension Stand
60" x .250" x 50,000# Sacma Slitting Line with Banding Line
Width: 60"
Thickness: .020" - .250"
Capacity: 50,000 lbs
Direction: Left to Right
Manufacturer: Sacma
Year: 1985
Line Speed: 200 mpm
Line Consisting of:
Entry Coil Car
Mandrel Uncoiler
Peeler Table
Entry Pinch Rolls
Crop Shear
60" x .250" x 40,000# Paxson Slitting Line
GENERAL SPECIFICATIONS:
GAUGE RANGE - 0.050" - 0.250"
WIDTH RANGE - 1" - 60"
MAX # OF MULTS - 13
MAX YIELD STRENGTH - .250" @ 50,000 KSI
MAX WEIGHT - 40,000 lbs
ARBOR - 8"
ID ENTRY - 20" - 28"
ID EXIT - 20" - 24"
Complete Line with the Following Components:
COIL CAR
WIDTH RANGE - 1" - 60"
MAX # OF MULTS - 13
MAX YIELD STRENGTH - .250" @ 50,000 KSI
MAX WEIGHT - 40,000 lbs
ARBOR - 8"
ID ENTRY - 20" - 28"
ID EXIT - 20" - 24"
Complete Line with the Following Components:
COIL CAR
60" x .140" x 40,000# Loopco Loop Slitting Line with 2 Heads
Thickness Range: .012" - .140"
Coil Weight: 40,000#
Entry Coil ID: 20" - 24"
Exit Coil ID: 20"
Entry & Exit Coil OD: 62"
Coil Width: 60" - 6"
Line Speed: 800 FPM
Yield Strength: 60,000 PSI
Line Direction: Left to Right
Material: Cold Ro
60" x .090" x 40,000# ProEco/Cincinnati Dual Injector Head Slitting Line
Thickness Range: .021" - .090"
3 Arm Entry Loopco Turnstile
Cincinnati L-Type Entry Coil Car
Cincinnati Mandrel Uncoiler
Outboard Bearing Support System
Peeler Table
Entry Edge Guides
Entry Pinch Rolls
60" (1600mm) x .250" (6mm) x 60,000# Slitting Line NEW
General Specifications:
Coil width: 23.6” – 63” (600 - 1600 mm)
Coil thickness: 0.030” – 0.25” (0.77 – 6.35 mm)
Coil weight: 66,138 Ib (30 mton )
Line speed: 0 – 100 meter / min
Complete Line with the Following Components:
COIL CAR (PIT TYPE)
DUAL MANDREL UNCOILE
60" (1500mm) x 6mm x 55,000# Bonak Slitting Line
Thickness Range: 0.5mm - 6mm
Line Direction: Left to Right
Speed: 150 MPM
Slitting Line Consisting of the Following Components
Pit Type Coil Car
Double End Expandable Mandrel Uncoiler
Hydraulic Expansion
Maximum Weight: 55,000#
ID: 508mm, 610mm, 750mm
50" x .250" x 48,000# Octagon/Alcos Slitting Line
Year 1982
Upgraded As Follows:
New Alcos Slitter Heads & Drive: 1982
New Octagon Scrap Winders, Looping Pit Table, Tension Stand, and 4 Arm Turnstiles: 1992
New Recoiler Mandrel: 1997
New Alcos Entry Line Uncoiler, Hold Down, Peeler, Flattener Rolls and Bearings: 2002
Width Range: 51" - 8"
Upgraded As Follows:
New Alcos Slitter Heads & Drive: 1982
New Octagon Scrap Winders, Looping Pit Table, Tension Stand, and 4 Arm Turnstiles: 1992
New Recoiler Mandrel: 1997
New Alcos Entry Line Uncoiler, Hold Down, Peeler, Flattener Rolls and Bearings: 2002
Width Range: 51" - 8"
50" x .250" x 40,000# Loopco/Stamco Slitting Line with 2 Slitting Heads
Manufacturer: Loopco/Stamco
Width Capacity: 50”
Weight Capacity: 40,000 Lbs.
Gauge Thickness: .044"-.269"
Entry & Exit I.D.: 20"-24"
Line Direction: Right to Left
Line includes:
Turnstile, 4-Arm, 40,000 Lb., Loopco
L-Type Coil Car, Monarch-Stamco