Contact Galaxie
Call +1 (734) 727-0600 or send us an email.
We sell used machinery
The used metal processing machinery market is a universe ripe with uneven quality and pricing. Galaxie Corporation works with clients to eliminate this uncertainty, delivering value and predictability in meeting a client’s needs.
25 Ton x 78' Span NTC "D Class" Overhead Crane (2016)
Year: 2016
Capacity: 25 Ton
Lift: 7.31 M
Rail Span: 24.3 M
Column Span: 26M
Travel Distance: 90 M
Crane Specifications:
Main Hoist Speed: 1 - 4.8 - 9.6 Meter per Minute
Trolley: 4 - 13 Meter per minute
End Carriage: 10 - 30 Meter per minute
25 Ton Kalmar Forklift /Coil Lift Truck - Year 2009 K1
Manufacturer: Kalmar (Finland)
Kalmar Forklift Truck, Low Built
Wheelbase 4,250 mm
Capacity: 25,000 Kgs.
24" x .500" Torrance API Pipe Mill
Pipe Diameter: 6 5/8" -24"
Thickness Range: 5/32"-1/2"
Steel Grades API: X42, X52, X60, X70
Complete Tube Production Line with the Following Components:
Pit Type Coil Car
Cone Uncoiler: 25 Ton Coil Weight
5 Roll Flattener
Crop Shear
Edge Trimmer
24" x .169" Herr Voss 4-HI Leveler
Specifications:
Width Capacity: 24"
Thickness capacity: .036" - .169" (40,000 PSI) @ 24" Wide
Thickness capacity: .120" (70,000 PSI) @ 24" Wide
FPM: 60'-360'
Serial No.: 5244
Equipped With:
19 straightening rolls x 2.187 diameter
Three Flights of Back Up Rolls
Exit cascade loop support rollers
Width Capacity: 24"
Thickness capacity: .036" - .169" (40,000 PSI) @ 24" Wide
Thickness capacity: .120" (70,000 PSI) @ 24" Wide
FPM: 60'-360'
Serial No.: 5244
Equipped With:
19 straightening rolls x 2.187 diameter
Three Flights of Back Up Rolls
Exit cascade loop support rollers
24" x .125" x 8,000# Braner Cut-to-Length Line
Width: 24"
Gauge Range: .015-.125"
Weight Capacity: 8,000#
Complete Line with the Following Components:
Braner Uncoiler
Flattener
Shear
Stacker
24" x .040" x 10,000# Yoder/Loopco Loop Slitting Line
Thickness Range: .008" - .040"
Slit Width Range: .500" - 24"
Width Tolerance: +/- .003"
Coil Weight Capacity: 10,000 Lb
Entry Coil ID: 16" - 24"
Exit Coil ID: 16"
Mandrel Uncoiler & Coil Car
Yoder Slitter Head with 4" Dia Arbors
25 HP DC Slitte
24" x .001" - 0.075" x 10,000# Double Loop Ruesch Slitting Line with Banding Line
Manufacturer: Ruesch
Model #N2707
Serial #6013
General Specifications:
Gauge Range: 0.001” – 0.075”
Widths Produced: 0.625” – 24”
Minimum Start Width: 6”
Maximum Start Width: 24.5”
Entry Coil ID: 16" to 20"
Exit Coil ID: 6", 1
24" x 6 1/2" Ruesch Ring Slitter Head
Manufacturer: Ruesch
Line Speed: 0 – 285 FPM
Arbor Face: 24"
Arbor Diameter: 6 1/2"
125 HP Reliance DC Motor Drive
Tooling: 96 pcs. 12” dia x .500 Knives
194 pcs Spacers of Various Sizes
24" Ramec/Ruesch Precision Slitting Line
Year - 1993
- Ramec Mandrel Uncoiler
Coil ID Range - 12"-21"
Max Coil Width - 24"
- Ramec Driven Slitter Head
Arbor - 5 " Diameter x 32" Face
20 HP AC
- Ramec Motorized Scrap Winder
- Ruesch Hydraulic Tension Stand
- Ramec Mandrel Recoiler
Max Coil Width - 32", 30 HP, 230/460/3/60
- Ramec Mandrel Uncoiler
Coil ID Range - 12"-21"
Max Coil Width - 24"
- Ramec Driven Slitter Head
Arbor - 5 " Diameter x 32" Face
20 HP AC
- Ramec Motorized Scrap Winder
- Ruesch Hydraulic Tension Stand
- Ramec Mandrel Recoiler
Max Coil Width - 32", 30 HP, 230/460/3/60
24" Carver Industries #f12 16 A41 Panel Grooving Machine $3,000
MANUFACTURER: CARVER INDUSTRIES
MODEL NUMBER: F12-16-A41
SERIAL NUMBER: 965124
SPECIFICATIONS:
Purpose: Add Grooves to Strengthen Panels
Maximum Width: 24"
EQUIPPED WITH:
Adjustable Upper Bll
Push Buttons
NOTE: Additio
24" Carver Industries #f12 16 A41 Panel Grooving Machine $3,000
MANUFACTURER: CARVER INDUSTRIES
MODEL NUMBER: F12-16-A41
SERIAL NUMBER: 965124
SPECIFICATIONS:
Purpose: Add Grooves to Strengthen Panels
Maximum Width: 24"
EQUIPPED WITH:
Adjustable Upper Bll
Push Buttons
NOTE: Additio
24" (600mm) x .090" (2.3mm) x 15,000lbs Honda Rotary Loop CTL line
Manufacturer: Honda Japan
Material: Cold Rolled, Hot Rolled and Pickled
Line Speed: 80m/min
Thickness Range: 0.4mm to 2.3mm
Width: 200mm to 600mm
Entry Coil Skid
Pit Type Coil Car
Mandrel Uncoiler
Coil Weight: 7,5Ton
24 Stands (4 Cassette Type) Trapezoidal Roll Forming Line
0.4 - 0.8mm for 40/333mm
0.5 – 1.25 for 34/275mm
0.6 – 1.25 for 42/160mm (sinus)
0.5 – 1.25 for T 50 (48.5/250mm)
Line Speed: Max 40 m/min
Complete Line with the Following Components:
Floor Type Coil Car
Mandrel Uncoiler
Front Shearing &
23" x 0.013" x 7,000lbs Georg Loop CTL for Transformer Core Cutting (Upgraded 2006)
Currently used for (Grane Oriented) Electrical Silicon Steel
Working speed : 240m/min.
Featuring the Following (5)Shearing/Punching Capabilities: 45º-, 45º+, 90º, V Notch and Hole Punch (137" Depth)
Thickness Range: .007" to 0.013"
Complete Line with the Following Components:
22 Ton Svetruck Fork Lift / Coil Lift Truck - Year 2000
MANUFACTURING YEAR 2000
Weight 30000 Kg.
Internal no XN 1373A
Running hours approx.
22 Stand Roof Tile (3 Cassette Type) Complete Rollforming Line
Thickness Range: 0.35-0.8mm for Roof Tile
Producing Line Speed: Max: 8 m/min for Roof Tile
Entry Coil Car
Mandrel Uncoiler
Entry Shearing & Coil Guide Table & Protect Film Applicator Unit
Cassette Type Forming Machine (A, B, C)
A. Roll Forming Machine for Roof Ti
22 Stand Gasparini Trapezoidal Rollforming Line
Manufacturer: Gasparini
Year: 1988
Material: Galvanized and Pre-Painted Steel
Min Thickness: 0.40mm
Max Thickness: 1.25mm
Max Product Width: 1250mm
Max Coil Weight: 12 Ton
Line Direction: Right to Left
Complete Line with the Following:
Fl
215" (5480mm) x 5,480mm CNC Infeeding Rotary Table
Specifications:
Infeeding B-Axis Rotary Table
Table Size: 5,480mmx 5,480mm
Table Infeed, V-Axis: 4,500mm
Rotarty Table Positioning: 360,000
Table Weight Capacity: 176 Ton
Equipped with: Steel Sliding Way Covers
Infeeding B-Axis Rotary Table
Table Size: 5,480mmx 5,480mm
Table Infeed, V-Axis: 4,500mm
Rotarty Table Positioning: 360,000
Table Weight Capacity: 176 Ton
Equipped with: Steel Sliding Way Covers
21" x 6,000# x 1500 FPM Traverse Winding Line
Year 2001
Thickness Range: .028" - .052"
Width: .375" - .750"
Line Speed: 1500 FPM
Featuring Precision Servo Traverse
Pallet Type Uncoiler
3 Roll Powered Bridal Section
Polyurethane Coated Bridal Rolls
Recoiler with Servo Oscillator
20HI Sednzimir/ I2S Reversing Cold Rolling Mill
Strip Thickness: 370mm to 740mm
Thickness: Min 0.04mm to 3.5mm Max
Material: M70-A (Last Pass frm .012mm to 0.04mm)
Force Adjustment: 55,000KG
Tension: 21%
Back Tension:26%
AGC System by Gamma System
Main Motor: 597KW, 400 to 800rpm
Payoff Reel: 56KW, 500 to 1300r
2000T Door Press
St Lawrence Embossing Press and Dies
9 Panel Embossing Die
6 Panel Traditional Embossing Die
9 Panel Embossing Die
6 Panel Traditional Embossing Die
200 Ton x 12' Durma Primeline CNC 3 Axis Hydraulic Press Brake (Year 2009)
MFR: DURMA PRIMELINE
Tonnage: 200Ton
Max Pressure: 290 KG/CM- 4206 PSI
Thickness Capacity: 1/4"
Stroke: 8" (210mm)
Safety Distance: 10" (252mm)
Falling Time After Stopping: 95ms
Traversing Distance After Stopping: .250" (6mm)
20,000# x 72" Dahlstrom Cone Uncoiler & Coil Car
Floor Standing V-Type Coil Car
Cone-Type Uncoiler: Sliding Base
Peeling Table
Edge Trimming Head
Peeling Table
Edge Trimming Head
20,000# x 48" Terminal Equipment Uncoiler
General Specifications:
Max. Width: 48"
Max. Coil Weight: 20,000#
Coil ID: 17 1/4"-24"
Max Coil OD: 60"
Four Leaf Mandrel
Hydraulic Expansion
Sliding Base
Wichita Water Cooled Brake
Driven Snubber Roll
20,000# x 48" Terminal Equipment 2 Arm Turnstile
Max Coil Weight: 20,000#
Minimum Coil ID: 16"
Max Coil OD: 60"
Length of Arms: 53"
Minimum Coil ID: 16"
Max Coil OD: 60"
Length of Arms: 53"
20,000# x 48" Stamco Mandrel Uncoiler
Manufacturer: Stamco
Coil Weight: 20,000lbs
Sliding Base
Hydraulic Expansion
4 Leaf Mandrel Design
Feed Up Drive
20,000# x 48" Littell Double End Uncoiler & Coil Car
Manufacturer: Littell
Coil Capacity: 20,000#
Coil Width: 48"
Coil OD: 72" - 38"
Coil OD: 72" - 38"
Hydraulic 3 Leaf Expansion
Hydraulic Feed-Up Drive
Hydraulic Coil Rotation
Loop Control Arm
Attached Traversing Coil Car
Hydraulic Feed-Up Drive
Hydraulic Coil Rotation
Loop Control Arm
Attached Traversing Coil Car
20,000# x 48" Iowa Precision Double End Uncoiler
Manufacturer: Iowa Precision
Model# 20M48DH
Coil Weight Capacity: 20,000lbs per Mandrel
Coil Width: 48"
Coil ID Range: 16" to 20"
Hydraulic Rotation
Hydraulic Snubber Rolls
Hydraulic Feed Up Drive and Expansion
Control Stand
Dancer
20,000# x 36" Paxson Uncoiler
Serial No 11529-31275
16" - 20" Hydraulic Expansion
72" max OD
Wichita Water Cooled Brake
Sliding Base
20,000# x 22" Royalton Recoiler
22" Drum Face
20,000lbs Coil Weight
Serial#WOR37144
20" Drum Diameter
Hydraulic Push Off
Hold Down Roll
Hydraulic Drum
Linkbelt Speed Reducer
Line Direction Right to Left
125HP AC Motor 230/460V 1785rpm
Toshiba AC Digital Inverter Drive
20,000# 3 Arm Dahlstrom Turnstile
Model No. TACH-60-20M
Serial No. SP-489
20,000# Coil Capacity
3 Arms
36" Arm Length
Power Rotation
20' x 1/2" Cincinnati Press Brake
Max Thickness: 1/2"
Length: 20'
Model: 500
40HP Motor
Over all Dimensions: 76" x 208" x 136"
Length: 20'
Model: 500
40HP Motor
Over all Dimensions: 76" x 208" x 136"
20' x 1/2" Accurshear Squaring Shear
Z-ACCURSHEAR
Model# 850020 – 20’
Voltage: 440 Volts
Material Size = ½ x 20’
Ball Transfers (Mounted in Table)
20" Yamasui Hydrostatic Tester
Builder: Yamasui
Rebuilt in 2013
Diameter Range: 5" - 20"
Tube Length: 6M - 15M
Pressure Range: 120kg/cm2 - 500kg/cm2
Entry & Exit Tables
Clamping Table
High Pressure Pumps
Controls
Tooling
20" x 20" Behringer Automatic Horizontal Band Saw
Cutting Capacity
Rounds: 20.8"
Rectangles: 20.8" x 20.4"
Saw Blade Size: 283" x 2" x .063"
Saw Blade Speeds: 17M – 117M / Min.
Single Feed Stroke: 3M
Maximum Feed Length (Multiple Strokes): Infinite
Work Height: 27.5"
Motors
Saw Dr
20" x 0.093" x 2,500lbs Tishken Cut to Length Line
Manufacturer: Tishken
Gauge Range: 0.020” – 0.093”
Widths: 0.375” – 3”
Minimum Start Width: 0.375”
Maximum Start Width: 3”
Length Produced: 31” – 145”
Length Tolerance: +0.500” – 0.000
Complete Line with The Following:
Mandrel Uncoiler
30
20" x .500" API Pipe Mill Line
Year 1977
Tube Diameter: 5" - 20"
Wall Thickness: .125" - .500"
Length: 5.5 Meter to 20 Meter
Tons/Year: 140,000
Shaft Size: 223.5mm
Complete Mill Featuring:
350 KW Thermatool Welder
Rotary Cut-Off
Hydrostatic Tester
20" Fully Automatic Hyd-Mech Horizontal Mitering Bandsaw
Specifications
Maximum Cutting Capacity 90°, Round: 20”
Maximum Cutting Capacity 45°, Round: 20”
Maximum Cutting Capacity 30°, Round: 14”
Maximum Cutting Capacity 90°, Square: 20” X 20”
Maximum Cutting Capacity 45°, Square: 19” X 20”
Maximum Cutting Capacity 30°, Square: 12” X 20”
20" (508mm) - 100" (2540mm) Spiral Welded Pipe Production Line
Steel Pipe Diameter: 508-2540mm
Wall Thickness: 6-25.4m
Steel Grade: X42-X80；
Steel Pipe Length: 8-12.5M
Uncoiler
Peeler
Leveler
Shear
Joint Welding Machine
Side Guide (8)
Pincher
Fly Welding Trolley
Roll
20" (504mm) x 3mm Wall Spiral Weld Tube Mill
504mm OD x 3mm Wall Spiral Weld Tube Mill
504 od Max OD
504 od Max OD
20" (500mm) x 3.5mm - .1mm 4HI Reversing Mill with AGC
Width Range: 300mm - 500mm
Entry Thickness Range: 3.5mm - .25mm
Exit Thickness Range: .1mm - 2.0mm
Mill Speed: 200 / 800 meters/min
Coil Capacity: 7700 KG
Coil ID: 508mm
Coil OD: 1800mm
Tension at Payoff: 2000 KG
Tension at Reels: 15,000 KG
Mill
20 Stand Quator Rafted Quick Change Panel Rollforming Line with Stacker
NUMBER OF STANDS – 20 STAND STAND CONFIGURATION
RAFTED QUICK CHANGE– YES
SHAFT DIAMETER – 100MM
VERTICAL CENTERS – 230MM
HORIZONTAL CENTERS – 736MM at 20 STAND or 368MM at 36 STAND
SPEED – 35 MPM
LINE DIRECTION – RIGHT TO LEFT
MANDREL UNCOILER
20 Stand Olma Panel Rollforming Line with Stacker
MATERIAL WIDTH: 1250MM
NUMBER OF STANDS – 20
SHAFT DIAMETER – 100MM
VERTICAL CENTERS – 200MM
HORIZONTAL CENTERS – 500MM
SPEED – 35 MPM
LINE DIRECTION – LEFT TO RIGHT
LINE COMPONENTS:
MANDREL UNCOILER
ENTRY GUIDE
20 Stand Kohler/Dreistern Rollforming Line
Complete Line with the Following Components:
Kohler Double End Uncoiler
Kohler Leveler
LTEC Shear and End Welder
Heilbronn Feed Unit
Heilbronn Press
Dreistern Notching Pass
Dreistern Roll Former
Dalex Spot Welding Machine
Hanchen Cut Off
Kohler Double End Uncoiler
Kohler Leveler
LTEC Shear and End Welder
Heilbronn Feed Unit
Heilbronn Press
Dreistern Notching Pass
Dreistern Roll Former
Dalex Spot Welding Machine
Hanchen Cut Off
20 Stand Complete Roll Forming Line
Rollformer Details:
48" of Roll Space
8"-14" Vertical Adjustments
30" Horizontal Centers
4" Diameter Shafts
20 Stands
Thickness Range: .086"-.250"
Complete Line with the Following Components:
Entry L-Type Coil Car
Mandrel Uncoiler with Hold Do
2.75" (70mm) x 4mm OME Tube Mill
Speed: 70 MPM
Year: 1977
Upgraded: 2002
Model# P3/2"
Complete Tube Mill with the Following Components:
Coil Ramp
Mandrel Uncoiler
Shear and End Welder
Spiral Accumulator
4 Forming Stands
3 Finn Passes
7 Horizontal Side Guid
2.5" x .134" Turek & Heller Stainless Mineral Insulated Cable/Tube Line 2006
Year: 2006
Manufacturer: Turek & Heller
Finished Dia Stainless Tubing: .85" & 1.21"
Maximum Wall Thickness: .170"
Material: 446, 347, 825, Stainless Steel
Line produces Stainless Steel Mineral Insulated Tubing with Copper or Alloy Center Wire Conductor.
Applic
2.5" x .134" Stainless Precision Reduction Tube Mill Line with Spool Recoiling
Year: 2006
Manufacturer: Turek & Heller
Finished Dia Stainless Tubing: .85" & 1.21"
Maximum Wall Thickness: .170"
Material: 446, 347, 825, Stainless Steel
Line produces Precision High Strength Stainless Steel Tubing
Using (2) 8 Stand Compression Reducing
2.5" (65mm) x 3.5mm Rossi Tube Mill / 300 KW Thermatool CFI Solid State Welder
Tube Diameter Range: 65mm - 21.3mm
Wall Thickness: 1.2mm - 3.5mm
Line Speed: 60 Meters/Minute
Complete Mill Featuring:
Kent Vertical Floop
300KW Thermatool CFI Solid State Welder
Universal Drive Mill
Eddy Current Tester
ID / OD Scarfing
2.5" (63.5mm) x 3.2mm Oto Mills Tube Mill with Rafted Stands Year 1999
Model OTO 552-RTC - SN# 3777
Year of Manufacturer: 1999
Install 2000
Rafted Mill with Spare set of Rafted Stands
10MM to 63.5MM Round, possibly up to 70MM
12.7MM to 50.8MM Square, possible up to 63.5MM Square
.8MM to 3.2MM Thickness
2.375" x 5.5" PMC Thread Line Model 472
Taylor Wilson Facing Units; double ended; each with hydraulic clamp; adjustable 24" dia.
2.3" (58.4 mm) WYKO6-Roll Straightener
Number of Rolls: 6
Maximum Diameter: 2" (50.8 mm)
Minimum Diameter: 1/2" (12.7 mm)
Maximum Wall Thickness: .197" (5.00 mm)
Maximum Diameter Admitted: 2.30" (58.4 mm)
Normal Operating Speed: 200 - 400 FPM (60 - 120 MPM)
Roll Dimensions: 5.50" x 7.80" (140 mm x 200 mm)
2-HI/4-HI Fenn Rolling Mill
Work Roll Diameter: 1.5"
Manufacturer: Fenn
5" Dia. Back Up Roll
1 1/2" Dia. Work Roll
8" Roll Face
Manual Vertical Roll Adjustment
Roll Bearings
10 HP AC Motor
Motor Drive
Push Button Control
Starter Panel
Includes Spare Set of Back Up Rolls
5" Dia. Back Up Roll
1 1/2" Dia. Work Roll
8" Roll Face
Manual Vertical Roll Adjustment
Roll Bearings
10 HP AC Motor
Motor Drive
Push Button Control
Starter Panel
Includes Spare Set of Back Up Rolls
2-1/4" (57.1 mm) FENN #4-1/2 Swager
MANUFACTURER: FENN
MODEL NUMBER: 4-1/2
SERIAL NUMBER: 135
SPECIFICATIONS:
Maximum Tube Diameter: 2-1/4" (57.1 mm)
Die Width: 3-1/8" (79.3 mm)
Die Height: 2-1/4" (57.1 mm)
Die Length: 7-1/2" (190 mm)
Number of Cage Rolls: 12
EQUIPPED WITH:
(1) Motor: 10 HP, 230/460/3/60
MODEL NUMBER: 4-1/2
SERIAL NUMBER: 135
SPECIFICATIONS:
Maximum Tube Diameter: 2-1/4" (57.1 mm)
Die Width: 3-1/8" (79.3 mm)
Die Height: 2-1/4" (57.1 mm)
Die Length: 7-1/2" (190 mm)
Number of Cage Rolls: 12
EQUIPPED WITH:
(1) Motor: 10 HP, 230/460/3/60
2-1/2" (63.5 mm) x .125" (3.17 mm) MCKAY Tube Mill
Maximum Tube Diameter: 2-1/2" (63.5 mm)
Minimum Tube Diameter: 1/2" (12.5 mm)
Maximum Wall Thickness: .125" (3.175 mm)
Minimum Tube Diameter: 1/2" (12.5 mm)
Maximum Wall Thickness: .125" (3.175 mm)
2,500# Littell Uncoiler
Manufacturer: Littell
Coil Capacity: 2,500#
20" Coil Width
60" Coil OD
4 Leaf Manual Expansion
Electric Brake
Reastat Controls
2" x .135" Addison Machine/Elva Solid State Welder Tube Mill Line (2001)
Year 2001
Model: AM-2250-U
Serial No.
2" x .083" AEF Tube Mill with Kent Floop and Alpha Cut-Off
Maximum OD: 2" (50mm)
Maximum Wall Thickness: .083" (2mm)
Shaft Diameter: 2.5" (63mm)
Featuring:
Universal Drive Mill
Kent Floop
300 KW Solid State welder
Alpha Cut-Off Press
Model FR-8-Z-30
2 x 40 HP DC Drives
Double End Uncoile
2" Loopco Dedimpler
SPECIFICATIONS:
MANUFACTURER: LOOPCO
SERIAL NUMBER:
SPECIFICATIONS:
Minimum Tube Length: 24"
Maximum Tube Length: 12'
Maximum Tube Diameter: 2" (50.8mm)
Minimum Tube Diameter: 1/2" (12.7mm)
EQUIPPED WITH:
Push B
2" Lemont Dedimpler
SPECIFICATIONS:
MANUFACTURER: LEMONT
SERIAL NUMBER: 55732
SPECIFICATIONS:
Minimum Tube Length: 30" (762mm)
Maximum Tube Length: 24' (7315mm)
Maximum Tube Diameter: 2" (50.8mm)
Minimum Tube Diameter: 1/2" (12.7mm)
EQUIPPED
2" (52mm) x 2mm Abbey Etna Stainless Steel Tube Mill Line
Diameter Range: 18mm to 52mm
Thickness Range: .5mm to 2.5mm
Speed: 2.5mpm
Double End Littell Uncoiler
Oto Mills Manual Shear/End Welder
Double Sided Entry Edge Guides
3 Forming Stands (Bottom Driven)
50mm shaft Diameter
2 Fin Stands
2" (51mm) x 2mm Complete Tube Mill Line (New)
Diameter Of Pipe: Min. 16 Mm - Max. 51 mm
Wall Thickness: Min. 0.40 Mm -Max. 2.0 mm
Final Product Length: Min .4mt- Max. 8mt
Material: GRA – S235-S275-S355-Galvanized
Main Technical Specs:
Max.
2" (51mm) x 2.0mm CSI Precision Tube Mill Line Built New in 2020
Year 2020
Tube Diameter: 19mm - 51mm
Wall Thickness: 2.0mm - .5mm
Line Speed: 120 Meters/Min
Tooling: 19mm , 21mm , 25mm , 32mm , 35mm
Complete Line Featuring:
200 KW Solid State Welder
Horizontal Accumulator
11 Forming Stands
2" (50.8mm) x 5mm Olimpia80 Stainless Steel Tube Mill
Tube Diameter: 12.7mm - 50.8mm
Wall Thickness: 0.70mm - 5mm
Manufacturer: Olimpia80, Italy
Mill Includes Following Components:
Double Uncoiler
Shear End Welder
Cage Strip Accumulator
Strip Guide
Forming Section: 7 Driven Stands, 7 Side Idlers
2" (50 mm) x .197" (5 mm) BRONX 6-Roll Tube Straightener
MANUFACTURER: BRONX
6-Roll Vertically Opposed
Cross Roll Design
Maximum Diameter: 2" (50.8 mm)
Minimum Diameter: .394" (10.0 mm)
Maximum Wall Thickness: .197" (5.00 mm)
Maximum Diameter Admitted: 3" (76.2 mm)
Feed Direction: Right to Left
Roll Size: 4" Diameter x 8
196" (5000mm) x 500 Ton Beyeler Hydraulic Press Brake
Year: 2003
Manufacturer: Beyeler-Germany
Max press force: 5000 Kn (500 ton)
Working length; 5000 mm meter length
Operation voltage: AC3Ph400
Installed and Under Power
19" (480mm) x 8mm Farmer Norton 4-HI Reversing Mill
Thickness Range: 8mm - .8mm
Mill Speed: 0 - 500 Meters/Min
Mill Power: 1000 HP DC Motor
Reel Power: 240 HP DC Motor
AGC Control System
Work Roll Diameter: 180mm / 160mm
Back-Up Roll Diameter: 508mm/476mm
Mill Force: 250 Ton
Roll Coolant
Water Solubl
19" (480mm) x 2.5mm 4-HI Hitachi Reversing Cold Rolling Mill
Coil Width: 150-480 mm
Coil Thickness: 2.5 - 0.1 mm to 0.04 mm
Rolling Speed: 0-150/400m/min
Rolling Tension: 2100 kg max
Mill: DC 220kw 0-400/1100 rpm
Coil Thickness: 2.5 - 0.1 mm to 0.04 mm
Rolling Speed: 0-150/400m/min
Rolling Tension: 2100 kg max
Mill: DC 220kw 0-400/1100 rpm
Hydraulic Screw Down
Vollmer X Ray Thickness Control System
Right Reel: DC 150kw
Left Reel: DC 150 kw
Right Reel: DC 150kw
Left Reel: DC 150 kw
19" (480mm) x .038" (1mm) Copper Slitting Line
General Specifications:
Incoming Width Range: 150-480mm
Line Speed: 250-500FPM (75-150m/min) & 600-1200FPM (180-360m/min) through gear change.
Strip Thickness Range: .003"-.038" (0,15-1mm)
Entry Coil ID: 12"-20" (300-500mm)
Exit Coil ID: 3"-20" (75-500mm) with different spools