Contact Galaxie
Call +1 (734) 727-0600 or send us an email.
We sell used machinery
The used metal processing machinery market is a universe ripe with uneven quality and pricing. Galaxie Corporation works with clients to eliminate this uncertainty, delivering value and predictability in meeting a client’s needs.
72" x 135" x 50,000# Octagon/Pro Eco Loop Slitting Line
Thickness Range: .021" - .135"
Coil Weight: 50,000#
Line Speed: 1000 FPM
Coil ID Entry: 20" - 24" & 30"
Coil ID Exit: 20"& 24"
Coil OD: 74"
2 Heads with 8" Dia Arbor Arbors
150 HP DC Slitter Head Drive
250 HP DC Recoiler Drive
En
72" x 10,000lbs Coil Downlayer & Conveyor
Max Coil OD: 72"
Coil Capacity: 10,000Lb
Downlayer
1 Arm Turnstile
4 Sections Motorized Conveyor
79" Roll Face
4" Diameter Rolls
72" X 10,000# Stamco Turnstile & Downlayer
4 Arm Stamco Turnstile
40,000# Coil Capacity
Power Rotation
Power Push-Off
10,000# Stamco Downlayer
Right Angle Discharge
Horn Type
83 1/2" Roll Face
Powered Rolls
72" x 10,000# Braner Banding line
Manufactured in 1982
Semi-Automatic with Photo Cells for advancing Coils
Braner Right Angle Downlayer
25’ x 76” Roll Face Entry Conveyor, Powered 10 HP AC Motor
Banding Table with Cross Bar Lift and Indexing, Hydraulic Manual Banding
25’ x 76” Roll Face Exit Conveyor, Powered 10 HP AC Motor
72" x 0.135" Progressive Double Stub Edge Trimmer
Progressive Double Stub Edge Trimmer
-Entry and Exit Driven Pinch Rolls
4" Dia. x 77.5" Face Width
Hyd. Motor Driven
Air Cylinder loaded
-7" Dia. Knives
-Jackscrews for vertical adj. of top knives
-Powered Width Adj.
72" x .500" x 70,000 Red Bud / TMW EPS Coil Line NEW 2012
Year 2012
4 EPS Cell Design
Machine Concepts Cassette Leveler
Max Coil Width: 75"
72" x .500" TMW EPS Cell Year 2013
1: Used 72" x .500 TMW EPS Cell
Year 2013
Complete with: Cell Cabinet with 8 Turbines,
Filtertech Filtration System,
Turbine Chamber and Tank,
Magnetic Separator,
Heat Exchanger,
Grit Feeder,
Marley Cooling Tower,
Electrical Drives and Controls as related to the Cell.
Year 2013
Complete with: Cell Cabinet with 8 Turbines,
Filtertech Filtration System,
Turbine Chamber and Tank,
Magnetic Separator,
Heat Exchanger,
Grit Feeder,
Marley Cooling Tower,
Electrical Drives and Controls as related to the Cell.
72" x .375" x 60,000# Red Bud EPS Coil Line System
Year 2012
Thickness Range: .043"- .375"
Max Tensile Strength: 80,000 PSI
Max Yield Strength: 60,000 PSI
Max Coil Width: 75"
Line Speed: 150 FPM
Complete Line Featuring:
Single Cell Design
8 x 150 HP AC Turbine Motors
72" x .375" x 60,000# Cauffiel Cut to Length Line
Materials: HRS, P/O, Tread Plate
Thickness Range: .125- .375”
Max.
72" x .375" x 60,000# Bradbury CTL Line
Thickness Range .060-.375"
Maximum Width 72"
Complete Line Featuring the Following Components:
Double Cone Uncoiler
Wichita Water Cooled Brake
Entry Pit Coil Car
Coil Storage Ramp
Snubber and Peeler Roll
Coil Breaker
72" x .375" Coil Joining Welder
MANUFACTURER: GUILD INTERNATIONAL (U.S.A.)
PURPOSE: WELDING OF COILS OF METAL TOGETHER
MAX. COIL WIDTH: 72" (1828mm)
MIN. COIL WIDTH: 20" (508mm)
COIL THICKNESS RANGE: .060-.375"
ELECTRIC: 460 VOLT, 3 PH., 60 HZ
PURPOSE: WELDING OF COILS OF METAL TOGETHER
MAX. COIL WIDTH: 72" (1828mm)
MIN. COIL WIDTH: 20" (508mm)
COIL THICKNESS RANGE: .060-.375"
ELECTRIC: 460 VOLT, 3 PH., 60 HZ
72" x .275" x 64,000# Herr Voss Cut-to-Length Line
Manufacturer: Herr Voss
Type of Material: Hot Rolled, Cold Rolled, Stainless Steel, Aluminum, Galvanized
Yield Strength: 45,000 PSI at Max Gauge
Gauge Range: .067” - .275”
Coil Weight: 64,000#
Coil Width: 18” - 74” (1/2” – 1.5” each Side for Side Trimming)
Coil I.D.: 18.5” – 24.5
72" x .187" x 60,000# Stamco Injector Head Slitting Line
Line Installed in Plant
General Specifications
Mfg - Stamco
Year - 1987
Material Thickness - Min/Max - .015" - .187"
Coil Width - Min/Max - 12"/72"
Coil Weight - Entry/Exit - 60,000#/40,000#
Entry Coil ID - 20"-24" (30" w/ Spacers)
Entry Coil OD - 76"
General Specifications
Mfg - Stamco
Year - 1987
Material Thickness - Min/Max - .015" - .187"
Coil Width - Min/Max - 12"/72"
Coil Weight - Entry/Exit - 60,000#/40,000#
Entry Coil ID - 20"-24" (30" w/ Spacers)
Entry Coil OD - 76"
72" x .187" x 20,000# Universal/Bradbury Slitting Line
L-Type Coil Car
Bradbury Mandrel Uncoiler
18" to 20" Coil ID
Slidding Base
Feed Up Drive
Entry Hydraulic Peeler Table
Universal Driven Sliting Head
7" Diameter Arbor, 100HP AC Motor with Variable Speed Drive
Scrap Winder
Exit Table
Recoiler
72" x .187" Allor Scale Breaker NEW 2012 with Filtration System
Year 2012
Max Coil Width: 72"
.040" - .187" @ 50,000 PSI Yield
.062" - .100" @ 75,000 PSI Yield
.101" - .187" @ 75,000 PSI Yield
Max Line Speed: 500 FPM Lower Yield / Thinner Gauge
Max Line Speed: 300 FPM High Yield / Thicker Gauge
Al
72" x .135" x 40,000# Bradbury Slitting Line
Max Gauge: .018-.135
Line speed up to 300 FPM
Bradbury Coil Car
Mandrel Uncoiler
Expansion: 20” to 24”
Bradbury Slitting Head unit
2 heads
Arbor: 7” Diameter
Interchangeable Head Design
Bradbury Recoiler
75 H.P.
72" x .118" x 77,000# Schleicher CTL Line
Year 1997
Max Width 72"
Thickness Range .023-.118"
Max Coil Weight 77,000#
Coil OD: 35.8-72"
Coil ID: 22.4", 24.8"
Max Width 72"
Thickness Range .023-.118"
Max Coil Weight 77,000#
Coil OD: 35.8-72"
Coil ID: 22.4", 24.8"
72" x .105" x 20,000# Dahlstrom CTL Line
Thickness Range: .024" - .105"
Coil Weight: 20,000 lbs
Make: Dahlstrom Industries
Coil Width: 24" - 72"
Coil ID: 16" - 24"
Coil OD: 72"
Speed: 210 feet per minute
Direction: Right to Left
Coil Width: 24" - 72"
Coil ID: 16" - 24"
Coil OD: 72"
Speed: 210 feet per minute
Direction: Right to Left
Line includes:
Entry Coil Conveyor
Floor Standing V-Type Coil Car
Floor Standing V-Type Coil Car
72" x .090" Loopco 5-High Precision Leveler
Thickness Range: .015" - .090"
Work Roll Diameter: 1.5"
Year 1990
5-High Design
Butech Design
Thickness Range: .015" - .090"
Width Range: 12" - 72"
5-High Design
Butech Design
Thickness Range: .015" - .090"
Width Range: 12" - 72"
88" Roll Face
17 Work Rolls
Work Roll Diameter: 1.50" (on 2" Centers)
Intermediate Roll Diameter: 1.25"
17 Work Rolls
Work Roll Diameter: 1.50" (on 2" Centers)
Intermediate Roll Diameter: 1.25"
72" x .080" x 60,000# Stamco Injector Head Slitting Line
COIL WEIGHT - 60,000 LBS
LINE SPEED - 750/1500 FPM
THREAD SPEED - 50 FPM
LINE DIRECTION - LEFT TO RIGHT
ENTRY 4-ARM TURNSTILE
L-TYPECOIL CAR
MANDREL UNCOILER
EDGE GUIDE
ENTRY CROP SHEAR
TWO INJECTOR SLITTING HEADS
(1) 60" SLITTING HEAD
(2) 72" SLITTING HEAD
75 HP MOTOR
LINE SPEED - 750/1500 FPM
THREAD SPEED - 50 FPM
LINE DIRECTION - LEFT TO RIGHT
ENTRY 4-ARM TURNSTILE
L-TYPECOIL CAR
MANDREL UNCOILER
EDGE GUIDE
ENTRY CROP SHEAR
TWO INJECTOR SLITTING HEADS
(1) 60" SLITTING HEAD
(2) 72" SLITTING HEAD
75 HP MOTOR
72" x .080" x 50,000# Welty Way Slear Line
General Specifications:
Thickness Range: .019-.080"
Entry Weight Capacity 50,000#
Maximum Length: 144"
Number of Cuts: 5
Entry ID 24"
72" x .075" x 40,000# Dahlstrom/Herr Voss Loop Cut-To-Length Line with 4HI Leveler
Thickness Range: .024" - .075"
Line Speed: 300 FPM
17" - 25" Coil ID
72" Coil OD
Sheet Length: 12" - 144"
Stack Weight: 10,000#
Complete With:
3 Arm Turnstile
Mandrel Uncoiler
Peeler Table
Edge Trimmer and Scrap Chopp
72" Push Pull Pickle Line with Temper Mill
Stainless Capable
72” Wide x 40 Ton Coils
200 and 400 FPM
Capable of 30,000 - 40,000 tons per month
Manufactured by Danelli Wean
Granite Wet Section with Rubber Lined Tanks
2 HI Temper Mill included with Shape Correction
Manufactured by
72" Pro Eco / SMS Tension Leveler NEW 2007 (Never Installed)
72" Pro Eco / SMS Tension Leveler New 2007
Never Installed Brand New
Tension Leveler Only with Entry & Exit Bridles, Leveler and Drives with Motors
72" Max Coil Width
Carbon Steel Capacities:
Strip Size, in
Yield Strength, psi
Elongation Rate
72" (2000mm) x 6mm x 50,000# Atecnin/Fagor Flying Shear Cut-to-Length Line
Manufacturer - Atecnin/Fagor
Line Rebuilt in 2012 by Fagor
Width Range: 800mm - 2000mm
Thickness Range: 1.5mm - 6mm
ID/OD Range: 500mm ID/850mm OD
Speed Range: 9.5-30 MPM
Shear Travel: 800mm +/-
Sheet Length: 750mm - 6000mm
Maximum Stack Weight: 5,000 Kg
Coil Capacity: 25 Ton
Line Rebuilt in 2012 by Fagor
Width Range: 800mm - 2000mm
Thickness Range: 1.5mm - 6mm
ID/OD Range: 500mm ID/850mm OD
Speed Range: 9.5-30 MPM
Shear Travel: 800mm +/-
Sheet Length: 750mm - 6000mm
Maximum Stack Weight: 5,000 Kg
Coil Capacity: 25 Ton
72" (1867mm) x 4.8mm Steel Stamco Tension Level Line
Year Manufactured: 1992
Coil Width: 762-1867mm
Gauge (Steel) 1.6mm - 4.8mm ( up to 6.5mm at restricted speed)
Coil Weight: 18 Tons
Coil O.D: 914-2135mm
Coil I.D: 508-635mm
Shear Strength: 241-344 mpa
Yield Strength: 69.8-551.5 mpa
Line Speed: Up to 92 m/min
72" (1830mm) x 2mm Bronx Multi Strip Blanking Line with 6HI Leveler
Year 1996
Thickness Range: .4mm - 2mm
Coil Weight Capacity: 20,000 KG
Coil ID: 508mm - 610mm
Coil OD: 2100mm
Max Sheet Length: 4500mm
Min Sheet Length: 100mm
Slitting Capacity: 6 cuts 2mm
Line Speed: 100 Meters/Min
Featuring:
72" (1800mm) x .315" (8mm) x 25 Ton 4 Arm Capstan Robot Loop Slitting Line (Year 2006)
Year: 2006
2 Coil Storage Ramp
Pit Type Coil Car
Double Expandable Mandrel Uncoiler
Entry Pinch Rolls
5 Roll Flatener
Entry Crop Shear
Adjustable Entry Edge Guides
Neopreme Pass Line Roll
Slitting Head
11" Arbor Diameter
75" Arbor Face
72" Drop-in Modular Stainless Steel Brush Roll Units - 2 Available
2 drop-in modular stainless steel brush roll units
8 Rolls Per unit
Each roll individually driven by 50HP AC Motor
Hitachi J300 Inverter Drives
Air knife
8 Rolls Per unit
Each roll individually driven by 50HP AC Motor
Hitachi J300 Inverter Drives
Air knife
7000 Ton Hydraulic Pipe Forming Press with 2 sets of Bending Rolls
Year 2013
HEAVY WALL PIPE FORMING LINE
7000 Ton Hydraulic Press
Model: CIM HP8000
6500mm x 3200mm Bed Area
4200mm pipe - 1250mm Pipe Diameter = 25mm - 110mm thickness
3 Roll Bending Rolls
Model CIMBR3 110T x 420L
Max Thickness 1
70" Kampf Precision Foil Aluminum Slitting Line (2001)
Year 2001
Aluminum Alloys: 1145, 1100,3003, 7072, 811
Temper: 0 - H19
Entry Strip Width: 25" - 69" (635mm - 1753mm)
Line Speed: 2600 FPM (800 Met/Min)
Thickness: .002" - .015" (.05mm - .381mm)
(Can Lid Stock .037" or .93mm)
Temper Dead Soft Aluminum .081" (
7.5 Ton Voest Alpine Pallet Lift with Stand
Weight Capacity: 7.5 Tons
Open Close
Unit Weight: 4,700#
Stand Included
7 Stand Custom Cantileveller Style Rollformer $5,000
MANUFACTURER: CUSTOM
SPECIFICATIONS:
Line Direction: Right to Left
Number of Stands: 7
Roll Diameter: 3.75"
Roll Space: 2.5"
Horizontal Centers: 6"
Vertical Adjustment: 3.5"
Chain Driven
EQUIPPED WITH:
660mm x 22.2mm Class #1 European Built API / Structural Pipe Mill New in 2010
Year: 2010
Built By Class 1 European Pipe Mill Builder
State of the Art
Line Pipe: 244.5mm - 660mm Dia
Wall thickness: 4.4mm - 22.2mm
Material X80
Casing Tube: 245.5mm - 508mm
Wall Thickness: 7.09mm - 16.66mm
Material: N80
CHS: 244
66" x .134" x 60,000# Pro-Eco Triple Injector Head with Turret Recoiler Loop Slitting Line
Direction Right to Left
Coil Weight 60,000# Entry and Exit
Thickness Range .015-.134"
Line Speed 500 and 1500FPM
Coil Width Range 12-66"
Coil ID 20" & 24"
Max Coil OD 72"
Coil Weight 60,000# Entry and Exit
Thickness Range .015-.134"
Line Speed 500 and 1500FPM
Coil Width Range 12-66"
Coil ID 20" & 24"
Max Coil OD 72"
66" x .075" Stamco Edge Trimmer
Year: 1984
Width Max. Trimmed: 66"
Min. Untrimmed: 30"
Thickness: 0.008" - 0.075"
Thread Speed: 50 FPM
Line Speed: 1000 to 2500 FPM
Double Eccentric Trimmer Arbor Gap Adjustment
Arbor Diameter: 6.5"
Width Adj.
65mm x 3.5mm Rossi Tube Mill / 300 KW Thermatool CFI Solid State Welder
Tube Diameter Range: 65mm - 21.3mm
Wall Thickness: 1.2mm - 3.5mm
Line Speed: 60 Meters/Minute
Complete Mill Featuring:
Kent Vertical Floop
300KW Thermatool CFI Solid State Welder
Universal Drive Mill
Eddy Current Tester
ID / OD Scarfing
650" x 3000 Ton Mesta Press Brake
Capacity: 3000 Ton
Thickness Range: 3/16" to 3/4"
Length: 654"
Work Tables
Hydraulic Pumps with 75HP motors
Max.
65" x 8,000# Coil Packaging Line
Right Angle Downlayer
174" x 65" Roll Face Power Conveyor Section (3 Sections)
43' Total Powered Conveyor
Banding Table with Power Rotation
Built in Scale
Hydraulic Unit
Operator Push Button Station
65" x .080" x 30,000lbs Hunter Eng. Aluminum Cleaning Line (2007)
Manufacturer: Hunter Engineering
Year: 2007
Materials: 3105 alloys & sheet products
0.007” min. & 0.08” max. Gauge
20” min.
64" x 0.051" x 40,000# Herr Voss Tension Level CTL Line
Manufacturer: Herr Voss
Type of Leveling: Tension Leveling Package (Herr Voss)
Type of Material: Galvanized, Pre-Painted Steel, Aluminum
Gauge Range: 0.015” – 0.051: (at 48” Width), 0.044” (At 60”)
Coil Weight: 40,000#
Coil Width: 18” – 64”
Coil ID: 20” – 22”
Maximum Co
64" (1626mm) x 23mm API Spiral Pipe Mill with Finishing Floor Year 1998
Year 1998
Pipe Diameter: 406mm - 1626mm
Wall Thickness: 4mm - 23mm
Strip Width: 600mm - 1600mm
Steel Grade: GrA X70
Complete Mill Featuring:
32 Ton Uncoiler
Krautkramer Ultrasonic Test
Scan Master Weld Seam Test
Selfert SP3 Rad
63" (1600mm) x .80" (20mm) Emil Wolf Spiral Pipe Mill
Make: Emil Wolf (Germany)
Pipe Diameter: 159mm - 1600mm
Wall Thickness: 0.15" (4mm) - .80" (20mm)
Coil Weight: 40,000#
Speed: 0.6 - 2 meters per minute
Direction: Left to Right
Entry Coil Car
Coil Unwinder
Hydraulic Peeling Table
6-Roll Coil Straightening Machine
Edge Trimming Unit
Pipe Diameter: 159mm - 1600mm
Wall Thickness: 0.15" (4mm) - .80" (20mm)
Coil Weight: 40,000#
Speed: 0.6 - 2 meters per minute
Direction: Left to Right
Entry Coil Car
Coil Unwinder
Hydraulic Peeling Table
6-Roll Coil Straightening Machine
Edge Trimming Unit
62" X .315" FIMI 4-HI Precision Leveler (2000)
Maker: FIMI
Year: 2000
Strip Width: 400 - 1.650 mm
Strip Thickness:2 - 8 mm
Speed: 30 m/min
Coil Width: 1.850 mm
No. of Levelling Rolls: 15
Working Roll Diameter: 80 mm
No. of Supports top/bottom: 5/5
Driving Power: 80 kW
62" x .250" x 50,000# Cauffiel Heavy Duty Press Feed Line
Capacity: 50,000 lbs
Thickness Range: .250"
Speed: 30 - 75 SPM
Maximum Coil Weight: 50,000#
Coil Width:6" - 62"
Coil O.D.: 76"
Coil I.D.: 20" or 24"
Coil Loader
Maximum Coil Weight: 50,000#
Coil Width:6" - 62"
Coil O.D.: 76"
Coil I.D.: 20" or 24"
Coil Loader
50,000# Mandrel Uncoiler
Peeler and Hold Down Roll Combination
Leveler
Peeler and Hold Down Roll Combination
Leveler
62" (1575mm) x 6mm Andritz Push Pull Pickle Line with Acid Regeneration Plant YEAR 2000
Year 2000
Capacity: 550,000 Ton/Year
Push Pull Pickle Line with Acid Regeneration Plant
Hydrochloric Acid
Shallow Groove Turbulent Pickling
Multi Stage Compact Ladder Rinse Process
Coil Width" 600mm - 1575mm
Coil Tickness: 1.2mm - 6.0mm
Co
61" (1550mm) x 2.5mm x 60,000# FIMI Cut-to-Length Line
Coil Weight Capacity: 30 Ton
Line Speed: 60 mpm
Entry Floor Type Coil Car
Mandrel Uncoiler
Outboard Bearing Support
Entry Pinch Rolls
Powered Edge Guides
4-HI Precision leveler
Servo Feeding System
Mechanical Shear
Anti-scratch Stacker
61" (1550mm) 4-HI Temper Skin Pass Cold Rolling Mill Year 2001
Year 2001
Entry Thickness: 2.0mm - .20mm
Finish Thickness Minimum: .2mm
Coil Width: 600mm - 1550mm
Coil Weight Capacity: 30,000 KG
Mill Speed: 863 MPM
Work Roll Diameter: 533mm - 483mm
Back-Up Roll Diameter: 1346mm - 1245mm
Mill Drive: (2) 597KW
61" (1550mm) 4-HI Cold Reversing Mill New 2001
Year 2001
Entry Thickness: 1.5mm - 5.0mm
Exit Thickness: .20mm - 2.0mm
Mill Speed: 863 MPM
Coil Capacity: 30,000 KG
Complete Mill Featuring
Hydraulic Screw Downs
AGC Gauge Control
Main Mill Drive: 2 x 2234 KW DC Motors
Tensio
60” x .375” x 50,000# Seco Slitting Line
Cold Rolled and Hot Rolled Steel
18-60” Strip Width
Two Speed Gear Box 200-500 FPM
Thickness: .032-.375”
L Type Entry Coil Car
50,000# Max Coil Weight
Uncoiler:
Coil ID: 23-30.5”
Coil OD: 72” Maximum
Coil Weight: 50,000# Maximum
60” 4 stand Tandem Cold Rolling Mill
Size Mill: 60”
Size Rolls
Back-Up Roll: 53” x 60”
Work Roll: 22” x 60”
Roll Bearing
Back-Up Roll: Tapered Morgoil Type
Work Roll: Tapered Roller Type
Drives
#1 Stand (1) 3500 HP Motor
#2-3-4 STDS (2) 2500 HP Motor
Total
6000W Tanaka Laser
Year: 2004
Model Number: TF6000BLMXV30
Serial Number: 10-1507
Power: 6000 Watt Capacity
Controller: Fanuc
Material Handling Equipment Capability: 10 Tons
Material Thickness: Max: 1.0” Min: 16 Gauge
Material Width: Max: 120” Min: 2 ½”
Material Length: Max: 480” Min:
600# x 10" Littell Uncoiler - $600
Manufacturer: Littell
Serial# S-6734-66
Code: 5001
Coil Width: 10"
Weight Capacity: 600lbs Max
600# x 10" Littell Uncoiler
Manufacturer: Littell
Serial# S-6734-66
Code: 5001
Coil Width: 10"
Weight Capacity: 600lbs Max
Serial# S-6734-66
Code: 5001
Coil Width: 10"
Weight Capacity: 600lbs Max
60,000# x 84" Wean/United Double Cone Uncoilers
Coil Capacity: 60,000#
Coil Width: 84" - 15"
Coil ID: 20" - 30"
Coil OD: 80" - 30"
Dual Wichita Water Cooled Brakes
Sliding Base
Powered Feed-Up Drive
Air Clutch
Coil Lift
New Bearings
New Shafts
60' x .125" Herr Voss 6HI Leveler
Herr Voss 6 HI Leveler
6 HI Design
Model: 66/1.750-19/7 6HI
Thickness Range: .030" - .125" Carbon Steel
.030" - .100" Stainless Steel
Coil Width: 12" - 60"
Roll Face: 66"
Shear Strength: 60,000 PSI
19 W
60" x 8" Pamco Slitter Head $10,000
Arbor Diameter: 8"
Width: 60"
62" Arbor Face
8" Dia Arbors
Parallel Top Arbor Adjustment
2 Scrap Guides
Over Running Clutch on Input
Screw Jacks
Double Row Bearings
8" Dia Arbors
Parallel Top Arbor Adjustment
2 Scrap Guides
Over Running Clutch on Input
Screw Jacks
Double Row Bearings
60" x 8" Pamco Slitter Head
Arbor Diameter: 8"
Width: 60"
62" Arbor Face
8" Dia Arbors
Parallel Top Arbor Adjustment
2 Scrap Guides
Over Running Clutch on Input
Screw Jacks
Double Row Bearings
8" Dia Arbors
Parallel Top Arbor Adjustment
2 Scrap Guides
Over Running Clutch on Input
Screw Jacks
Double Row Bearings
60" x 32" Continental/VAI 2-HI Temper Mill
Manufacturer: Continental (Complete Revamping by Voest Alpine Industries)
Mill Technical Specifications:
Coil OD: 72"
Coil ID: 24"
Coil Weight: 36,000lbs
Strip Width: 26" to 53"
Thickness Range: .050" to .011"
Elongation: 0 to 2%
Work Rolls
60" x 25 ton Reversing Reels & New Mill Ind. Mandrels - $250,000
Width: 20" - 62"
Thickness: .012" - .250"
Coil Weight: 25 Ton Max.
Speed: 2,000 FPM
Gauge Range: .012 - .250"
Entry and Exit Coil I.D.: 20"
Exit Coil O.D.: 78"
Entry Reel: 66" Face Hydraulic Push-Off, 2- 1085 HP DC Motors
Coil Car
Exit Reel: 2 - 1085 HP DC Motors
Speed: 2,000 FPM
Gauge Range: .012 - .250"
Entry and Exit Coil I.D.: 20"
Exit Coil O.D.: 78"
Entry Reel: 66" Face Hydraulic Push-Off, 2- 1085 HP DC Motors
Coil Car
Exit Reel: 2 - 1085 HP DC Motors
60" x 25 ton Reversing Reels & New Mill Ind. Mandrels
Width: 20" - 62"
Thickness: .012" - .250"
Coil Weight: 25 Ton Max.
Speed: 2,000 FPM
Gauge Range: .012 - .250"
Entry and Exit Coil I.D.: 20"
Exit Coil O.D.: 78"
Entry Reel: 66" Face Hydraulic Push-Off, 2- 1085 HP DC Motors
Coil Car
Exit Reel: 2 - 1085 HP DC Motors
Speed: 2,000 FPM
Gauge Range: .012 - .250"
Entry and Exit Coil I.D.: 20"
Exit Coil O.D.: 78"
Entry Reel: 66" Face Hydraulic Push-Off, 2- 1085 HP DC Motors
Coil Car
Exit Reel: 2 - 1085 HP DC Motors
60" x 16' Sheet Stacker
Width: 60.5"
Max. Stack Length: 16'
Air Blower Stacking System
Stacker
Conveyer #1
Conveyer # 2
Conveyer # 3
Skid # 1-PLC cabinet
Skid # 2 - blower motor
Skids # 3
60" x 1/4" x 40,000# UMI /ProEco (2 Head) Slitting Line
Maximum Thickness: .250"
Max Coil Weight: 40,000lbs
Line Direction: Left to Right
Entry Coil Car
Max Coil Weight: 40,000lbs
UMI Mandrel Uncoiler
20" to 24" ID,72" OD
Entry Edge Guides
UMI Entry Crop Shear
(2) UMI Slitting Heads,Complementary Set of K
60" x .394" (1500mm x 10mm) Spiral Pipe Mill Line (NEW CONDITION)
Pipe Diameter: 400mm - 1500mm
Wall Thickness: 4mm - 10mm
Length of Coil: 800mm - 1500mm
Head Tilting Angle: 15 - 42 degrees
Max Installed Power: 120kw
Voltage/Frequency/Phase: 380v - 50hz - 3
Standard Equipment:
PLC
Reel for coils
Reel Rewinding Device
Submersed Arc Welding
Wall Thickness: 4mm - 10mm
Length of Coil: 800mm - 1500mm
Head Tilting Angle: 15 - 42 degrees
Max Installed Power: 120kw
Voltage/Frequency/Phase: 380v - 50hz - 3
Standard Equipment:
PLC
Reel for coils
Reel Rewinding Device
Submersed Arc Welding
60" x .375" x 40,000# Automatic Feed CTL Line with Edge Deburr
General Specifications:
Width Range: 4-60"
Gauge Range: .060-.375" (.500" at 30")
Coil ID: 24"
Coil OD: 72"
Pack Weight 20,000#
Pack Height 21"
Complete Line with the Following Components:
Three Arm Entry Turnstile
Strilitch Coil Car
Mandrel Uncoiler
60" x .250" x 60,000# Octagon / D&H Dual Injector Head Loop Slitting Line
Thickness Range: .015" - .250"
Line Speed: 1000 FPM
Entry Coil ID: 20" - 24"
Exit Coil ID: 20"
Coil OD: 72"
Shear Strength: 60,000 PSI
Line Direction: Left To Right
Complete Line Featuring:
Dual Injector Sitting Heads
8" Diameter Arbors
60" x .250" x 50,000# Stamco Dual Injector Head Loop Slitting Line
Year 1994
Thickness Range: .030" - .250"
Coil Capacity: 50,000#
Line Speed: 400 / 1000 FPM
8.5" Dia Arbors
2 Injector Slitter Heads
250 HP DC Slitter DRive
250 HP DC Recoiler Drive
Scrap Choppers
Syncro-Wind Tension Stand