Contact Galaxie
Call +1 (734) 727-0600 or send us an email.
Miscellaneous
Just one of the many metalworking machinery categories for which Galaxie is famous.
Purlin Vac-U-Paint System Line (NEW Never Installed 2003)
General:
-Line speed 160 fl:./200 ft.min.
·Max length part - 45ft
-Min. length part-6ft
-Maximum profiie - l 4 in.
1-ea-Vac-U-Paint VC2003 coater, 460 volt, 3 phase, 60 HZ, 40 HP blower with electrical panel, operator pedestal.
-Line speed 160 fl:./200 ft.min.
·Max length part - 45ft
-Min. length part-6ft
-Maximum profiie - l 4 in.
1-ea-Vac-U-Paint VC2003 coater, 460 volt, 3 phase, 60 HZ, 40 HP blower with electrical panel, operator pedestal.
Peddinghaus TDK 1000/9F 5 Axis Machine
Mechanically inspected and reworked
Five (5) – Axis: X,Y,Z,W & C
New components:
Fagor 8055 control
Fagor positioning drives and motors
Wiring, switches, motor starters and relays
Automatic set-up for different material shapes
Automatic clamp roller adjustment
Five (5) – Axis: X,Y,Z,W & C
New components:
Fagor 8055 control
Fagor positioning drives and motors
Wiring, switches, motor starters and relays
Automatic set-up for different material shapes
Automatic clamp roller adjustment
Peddinghaus Punch/Plasma Machine (2013)
FPB 1800
B1053
177 Ton capacity
6” x ¼” to 72” x 1.1/4”
272, 282 or 292 Series
Currently Under power
Peddinghaus Plate Processing Machine
FPB 1500-3E
New control, motor and drives
New Software for manual data input in feet/inches, fractions or metric
Automated DSTV data import using WIN-DNC
Tonnage Capacity : 177 Tons
Maximum Plate Size: 60" X 20'
New control, motor and drives
New Software for manual data input in feet/inches, fractions or metric
Automated DSTV data import using WIN-DNC
Tonnage Capacity : 177 Tons
Maximum Plate Size: 60" X 20'
Peddinghaus FDB 1500 Plate Drilling Machine
Aplication: Plate Drilling (with 3 Drill Spindles), Burning, Oxy Fuel and Plasma
Includes:
New Fagor Control
New Software with Automatic Nesting
New Motors, Drives & Electrical Components
New Hypertherm Plasma Unit
Repainted
30' Infeed Roller Conveyor
Includes:
New Fagor Control
New Software with Automatic Nesting
New Motors, Drives & Electrical Components
New Hypertherm Plasma Unit
Repainted
30' Infeed Roller Conveyor
Peddinghaus AFPS 623 Angle and Plate Line
Model 623-AFPS-G
Up to 6” x 6” x ½” Angle
Up to 6” x ½” Plate
Reworked with New Fagor Controls
New Motor, Drives, Encoders & Electrical Hardware
50' Material Capacity Infeed Conveyor
Farm Design Software with WinDnc
Software for Manual Data Input in Feet/Inches & Fractions or Metric
Up to 6” x 6” x ½” Angle
Up to 6” x ½” Plate
Reworked with New Fagor Controls
New Motor, Drives, Encoders & Electrical Hardware
50' Material Capacity Infeed Conveyor
Farm Design Software with WinDnc
Software for Manual Data Input in Feet/Inches & Fractions or Metric
KALTENBACH CIRCULAR SAW
Model: Kaltenbach HDM 1430
Manufacturer: Kaltenbach-Germany-
Working range: 1200x420
Working length; up to 20ts.
Operation voltage: AC3Ph400
Year: 1990
High Production Paint Booth
Inside size: 3000 x 4000 x 4000 mm (L x W x H)
Outside size: 3900 x 4200 x 4300 mm (L x W x H)
Composition of booth: composed by ventilation cabinet, skeleton, and PVC soft curtain or canvas curtain, color of PVC can be made to your requirement.
Entrance door: Size: 3000 mm * 4000 mm with EU5 high efficiency filter
Outside size: 3900 x 4200 x 4300 mm (L x W x H)
Composition of booth: composed by ventilation cabinet, skeleton, and PVC soft curtain or canvas curtain, color of PVC can be made to your requirement.
Entrance door: Size: 3000 mm * 4000 mm with EU5 high efficiency filter
Guyson #RXS-1000 Carousel Type Blast Machine
Guyson #RXS-1000 Carousel Type Blast Machine
Isolator Doors either side of blast cabinet
Side Access Doors
Blade Rotation System
Low Media Indicator System
Machine Mounted Operator Controls
28" Cyclone with Support Steel Structure
Ficep Angle Line
Serial number: 21788
2 – Punches on each leg
Single cut shear
Max. diameter hole: 1-1/4”
Max angle: 1-1/2” x 1-1/2” up to 6” x 6” x 5/8”
Loading table for up to 40’ material
Misc.
Ficep Angle Line
Year : 1997
6" x 6" x 1/2"
Triple Tooling on each leg
Loading System for 40' Material
Single Cut Shear
Flat stock - up to 1/2" T x 7" W
New Fagor Control
15' Exit Conveyor with dumping
Farm Design software with WinDnc
Software for manual data input i
Complete Steel Drum Forming Line with Welder
Line Output is 720 Drums Per Hour
Complete with:
Indexing Conveyor
Horizontal Flanger
Bead Expander
Corrugator
Star Wheel Upender
Star Wheel Downender
Indexing Conveyor
Top and Bottom Insertion Machine
Seamer
Welder
Diameter Range 450-600mm
Height Range 550-1100mm
Complete with:
Indexing Conveyor
Horizontal Flanger
Bead Expander
Corrugator
Star Wheel Upender
Star Wheel Downender
Indexing Conveyor
Top and Bottom Insertion Machine
Seamer
Welder
Diameter Range 450-600mm
Height Range 550-1100mm
CMF Vacublast #92-2306 Air Blast Machine
CMF Vacublast #92-2306
Air Blast Machine
Blast Cabinet
60" Rotating Table
Cyclone
Glove Rings with Operator Armrests and built-in Gloves
Machine Mounted Operator Controls
Dust Collector Available Upon Request
Arrow #3532-2 Air Dryer
MANUFACTURER: ARROW
MODEL NUMBER: 3532-2
SERIAL NUMBER: UF 346
SPECIFICATIONS:
1.75 hp
SCFF115
EQUIPPED WITH:
Gauges for Refrigerant Pressure
Air Temperature
Air Pressure
Allied Boilers
Boiler No. 1
Year:2010
MFG. Serial No: 750150183
Max. W.P. P.S.I: 150
HTG. Surf, SQ. FT.: 750
Steam Pounds Per Hour: 51.75
Boiler No. 2
Year:2010
MFG. Serial No: 750150184
Max. W.P. P.S.I: 150
HTG. Surf, SQ.
6000W Tanaka Laser
Year: 2004
Model Number: TF6000BLMXV30
Serial Number: 10-1507
Power: 6000 Watt Capacity
Controller: Fanuc
Material Handling Equipment Capability: 10 Tons
Material Thickness: Max: 1.0” Min: 16 Gauge
Material Width: Max: 120” Min: 2 ½”
Material Length: Max: 480” Min:
60" Schaming Ultra Thin Mist Electrostatic Oiler
Line Speed: 600 FPM
Strip Width: 60"
Coatings: DOS (Deoctylsebacate)
Discharge Heads: (4) Ransburg Turbines
EQUIPPED WITH:
MEA Laser Edge Guide at Entry End
North American Digital Edge Guide at Exit
60" Coil Wash and Rinse Line
Pass Line Height: 4’9"
Max. Strip Width: 60"
Washer & Rinse Tank Capacity: 2,180 Gallons
Wash Tank Length: 38’
Rinse Tank Length: 19’
Top & Bottom Spray Pipes
Burner Tubes
Stainless Steel Construction
60 HP Red Bud Hydraulic Unit
60 HP AC Motor
1175 RPM, 230/460 Volt
3 Vane Hydraulic Pump
2 Accumulators
Cooling Unit
Siemens Controller Model GA29
59" (1500mm) x 4mm Voest Alpine Coil (Mashed Lap Design) Welder (2002)
Year: 2002
Max. Thickness: 4mm (.150”)
Min. Thickness: 0.8mm (0.031”)
Max Width: 1560mm (60”)
Min Width: 600mm (23”)
Max.
48" x .060" Memco Embosser
Memco #50 embosser, new 1981
Tonnage: 50
Rolls: 50" x 15" diameter
Typical material gauge: .060" aluminum or .036" mild steel
Material strip width: up to 48"
Hydraulic pressing, self contained hydraulics
DC electric main drive system, loop control
Two matched roll sets with
44" Black Brothers Roll Coater
YEAR: 1983
44" Wide Combination Roll Coater
38" Passline Height
For applying a variety of protective coatings to printed metal sheets.
Upper Elevator with 0 to 3" Opening
Air Cylinders to raise and lower top rolls and control downward pressure on stock.
25 Ton Kalmar Forklift /Coil Lift Truck - Year 2009 K1
Manufacturer: Kalmar (Finland)
Kalmar Forklift Truck, Low Built
Wheelbase 4,250 mm
Capacity: 25,000 Kgs.
22 Ton Svetruck Fork Lift / Coil Lift Truck - Year 2000
MANUFACTURING YEAR 2000
Weight 30000 Kg.
Internal no XN 1373A
Running hours approx.
20" x 20" Behringer Automatic Horizontal Band Saw
Cutting Capacity
Rounds: 20.8"
Rectangles: 20.8" x 20.4"
Saw Blade Size: 283" x 2" x .063"
Saw Blade Speeds: 17M – 117M / Min.
Single Feed Stroke: 3M
Maximum Feed Length (Multiple Strokes): Infinite
Work Height: 27.5"
Motors
Saw Dr
20" Fully Automatic Hyd-Mech Horizontal Mitering Bandsaw
Specifications
Maximum Cutting Capacity 90°, Round: 20”
Maximum Cutting Capacity 45°, Round: 20”
Maximum Cutting Capacity 30°, Round: 14”
Maximum Cutting Capacity 90°, Square: 20” X 20”
Maximum Cutting Capacity 45°, Square: 19” X 20”
Maximum Cutting Capacity 30°, Square: 12” X 20”
2-1/4" (57.1 mm) FENN #4-1/2 Swager
MANUFACTURER: FENN
MODEL NUMBER: 4-1/2
SERIAL NUMBER: 135
SPECIFICATIONS:
Maximum Tube Diameter: 2-1/4" (57.1 mm)
Die Width: 3-1/8" (79.3 mm)
Die Height: 2-1/4" (57.1 mm)
Die Length: 7-1/2" (190 mm)
Number of Cage Rolls: 12
EQUIPPED WITH:
(1) Motor: 10 HP, 230/460/3/60
MODEL NUMBER: 4-1/2
SERIAL NUMBER: 135
SPECIFICATIONS:
Maximum Tube Diameter: 2-1/4" (57.1 mm)
Die Width: 3-1/8" (79.3 mm)
Die Height: 2-1/4" (57.1 mm)
Die Length: 7-1/2" (190 mm)
Number of Cage Rolls: 12
EQUIPPED WITH:
(1) Motor: 10 HP, 230/460/3/60
10,000# Unique Welding Positioner
Serial: 98286
Model: Upc 100
Capacity: 10,000 lbs. @ 12"
Area of T Slotted Table: 48" X 48"
Power Table Tilting: 0 To 135 Degrees
Rotation Speed: Variable
Height Adjustment: 6" Increments
Table Heights: 48" To 84"
Pendant Control: Yes
10,000# Ransome Welding Positioner
Serial: 6521136
Model: 100pe
Year New: 1976
Load Capacity: 10,000 Lbs.
Table Diameter: 69"
Diameter of Sub Table: .
10,000# P&H Welding Positioner
Model: Wp-10
Capacity: 10,000 lbs.
Area of Table: 48" X 48"
Table Tilts: 135 Degrees
Table Height in Flat Positioning: 60"
Table Adjustments: 6" Increments
Pendant Control: Yes
Rotation Motor: 3
Tilt Motor: 5
10,000# Aronson Welding Positioner
Serial: 87486
Model: Hd100a
Year New: 1987
Load Capacity @ 12": 10,000 lbs.
Load Capacity @ 60": 3,000 lbs.
Diameter of Table: 60"
Rotational Speed: Variable
Rotational Torque: 120,000 lbs.
Titling Torque: 205,000 lbs.
Tilt Range Degree: 0 To 135°
10,000# Aronson Welding Positioner
Serial : 70140
Model: Hd-100a
Capacity: 10,000 lbs.
Table Size: 48" X 48"
Variable Rotational Speed: 0.020 To 1.0 Rpm
Tilt Range: 0 To 135 Degrees
Rotational Torque: 120,000 In/lbs.
Tilt Torque: 205,000 In/lbs.
Floor to Tap of Table: 44" To 74-1/2"
Floor
Peddinghaus Beam Drill Line, TDK 1000/3C
TDK capacity: 40” W x 18” H beams
Inspected and mechanically rebuilt
New Fagor 8055 Control
5 – Fagor drives: S Web Spindle, S Top Flange, S Bottom Flange, S X-Axis (material flow), S Tower Adjustment for automatic material set-up,
Electrical wiring
Proximity switches
Inspected and mechanically rebuilt
New Fagor 8055 Control
5 – Fagor drives: S Web Spindle, S Top Flange, S Bottom Flange, S X-Axis (material flow), S Tower Adjustment for automatic material set-up,
Electrical wiring
Proximity switches