7 5/8" x 0.250" ERW Tube Mill

You are here

Summary

Tube Mills & Pipe Mills - Welded
Round Pıpe: Ø 2” – 7 5/8 ” (60.3 – 193.7 Mm)
Square Profıle: 2” X 2”  - 6” X 6”
Rectangle Profıle: Max 4” X 8”
Thıckness: 0.060” – 0.250” (1.52 – 6.35 Mm)

Specifications

Contact Galaxie

Call +1 (734) 727-0600 or send us an email.
Round Pıpe: Ø 2” – 7 5/8 ” (60.3 – 193.7 Mm)
Square Profıle: 2” X 2”  - 6” X 6”
Rectangle Profıle: Max 4” X 8”
Thıckness: 0.060” – 0.250” (1.52 – 6.35 Mm)
Tube length: 20 ft (6,069 mm)  -  Max 40 ft (12,192 mm)
Coil type: Hot coil – Cold coil - Galvanized coil
Tensile Strength: 90,000 # (620 N/mm2 – Mpa)
Yield point: 52,000 # (355 N/mm2 – Mpa)
Strip width: Max 600 mm
 
OD tolerance: ± 0.15 mm
Accuracy: 1mm ; at 1 meter/length
Length Tolerance: - 0 / + 1 mm
 
Coil OD: Max 70” (1800 mm)
Coil ID: 20”  (508 mm)
 

MAIN COMPONENTS

  1. Strip Uncoiler
  2. Crop and Strip Joining Group
  3. Horizontal Strip Accumulator
  4. Strip Entry Leveling
  5. Forming Group
  6. Guiding Rolls/Seam  Guide
  7. Welding Group and Chip Removing
  8. Scrap winder
  9. Cooling Tunnel
  10. Calibration /Sizing Group
  11. Turk’s Heads (Profiling-Straightening Group)
  12. Double Head Cold Saw Group
  13. Stowing
  14. Electrical and electronic systems
  15. Hydrualic group
  16. Spare parts