15" (377mm) x 12.7mm ERW Pipe Mill

You are here

Summary

Tube Mills & Pipe Mills - Welded
Round pipe: Φ165mm – Φ377mm
Square tube: 100*100mm-□300*300mm
Wall thickness: 4.0mm – 12.7 mm
Pipe length: Max.

Specifications

Contact Galaxie

Call +1 (734) 727-0600 or send us an email.
Round pipe: Φ165mm – Φ377mm
Square tube: 100*100mm-□300*300mm
Wall thickness: 4.0mm – 12.7 mm
Pipe length: Max. 6-12m (±3mm)
Coil material: Carbon Steel Q195, Q235, Q345
Q195, Q235, Q345
Coil I.D.: 610/760mm
Coil O.D.: Φ1100mm — Φ 2000mm
Maximum weight: 25tons
Strip width: 400mm - 1200mm (±0.5mm)
Forming Type: Cold roll forming
Forming & welding speed: 10-35m/min
Welder: Solid state HF 800KW
800KW
Installation capacity: 3500 KW approximately
Dynamic power: Per requirement
Control power: Per requirement              
Feeding direction: Per requirement
Compressed air: Rate of flow:0.6m3/min    Pressure:4-7Kg/cm2
Cooling water: HF: 90m3/H; Mill: 40m3/h; Pressure: 3-5 Kg/cm2
Circulating water consumption: Approx. 1~3m3/h
Water quality: Emulsion
Production Flow:
Coil installation——Uncoiling——Pinching and leveling——End shear and welder——Accumulator——Guiding roller——Forming section——HF welder——Deburring——Water cooling——Sizing section——Flying cut-off——Conveyor
 
 
Equipment List:
Coil car
Uncoiler
Pinch & leveling
End shear & welding
Horizontal spiral accumulator
Guiding rollers
Forming Mill
Welding device
Water cooling
Sizing Mill
Run-out table
Buried parts
Electronic control system
Hydraulic system
Computer flying saw
800KW solid state H.F welder