12" x 1.375" x 2300# Oscillating Slitting Line

You are here

Summary

Slitting Lines
General Specifications:
Width Face: 4" - 12"
Width Range: .300" - 1.375"
Gauge Range: .010" - .050"
Coil O.D. Maximum: 38"
Finished Coil I.D.: 16"

Specifications

Contact Galaxie

Call +1 (734) 727-0600 or send us an email.
General Specifications:
Width Face: 4" - 12"
Width Range: .300" - 1.375"
Gauge Range: .010" - .050"
Coil O.D. Maximum: 38"
Finished Coil I.D.: 16"
Coil Weight: 500 Lbs. - 2,300 Lbs.
 
Line Includes:
Uncoiler
    48" Wide
    14" to 16' Hydraulic Drum, Pads for 20" I.D.
    Fixed Base
Welder - Guild, 14" Wide
Slitter (Herr), 40' Wide x 5" Diameter Arbor
Scrap Baller
Pinch Roll with Separator and Back Tension Brake
Separator Stand
Recoiler, 17" Total Eye to Sky Vertical, Winders with Hydraulic Oscillation

Incoming Coil to Payoff Reel:  
Coil Weight Maximum: 8,000 Lbs.
Nominal Maximum OD: 72"
       (coils need to be slightly under 72" in diameter or bottom of coil will touch floor)
14.5"/15" Maximum Width (determined by Guild Welder)
ID: 16" Minimum, 20" Maximum (available with plates)

Oscillated Material (Finished):  
Thickness:  .010" Minimum, .050" Maximum
Width:  .300 Minimum, 1.375" Maximum
Coil Weight Per Spool (500 Lbs. Minimum, 2,300 Lbs. Maximum
Maximum No. of Spools:  17
     (can be run at once, however number may need cut back when running heavy gauges)
Spool (effective material) Width:  4" Minimum, 12" Maximum
Spooled Material: 38" Maximum OD, 16" ID 

Oscillator table and reels are all driven hydraulically by a main power unit   
Main hydraulic unit contains:
Four (4) 20 HP, 1200 RPM, 220/440 V, 3PH, 60 cycle, AC motors
With four (4) Vickers pumps, Mod. No. V-134X-20, vane type fixed displacement, 1.5" inlet and
     1.25" outlet pipe ports, foot mounted.    
The table spool reels are each driven by individual hydraulic motors, 17 in total,
Model No. MF-2003-30-15-10, 3600 RPM, constant displacement, piston type, 1/2" pipe ports.