Manufacturer: Wagner
Maximum Strip Width: 3550mm (140")
Thickness : Up to 30mm (1.18")

Number of Work Rolls: 5 x(308mm dia.) + 2 (380mm) 2+2 upper and 3 lower
Number of Back Up   : 2 Flights with 2 Rolls
                      2 Flights with 3 Rolls

Working Speed: 5 and 8 mpm

Motor Power: Turning Rolls:.................   1 of 80 KW ...... 380V 50HZ 3 phase
             Elevation Rolls:...............   1 of 14 KW....... 380V 50HZ 3 phase
             Elevation Back Up Rolls: ......   2 of 3,9KW....... 380V 50HZ 3 phase

Electrical Cabinet

Made in 1988
Specifications:Max width: 3200 mm
Thickness Range :12mm to 40 mm
Max material speed: 12 m/minWork rolls: -Units: 7-Diameter: 340 mm,Backup rolls: -Units: 5,-Diameter: 340 mm,Supporting rolls:-Units: 15,-Diameter: 334 mm, Electrical motor: 132 kW

Manufactured Year: 1995
Reconditioned in 2007, Maximum Width: 2050 mm
Maximum Thickness: 5 to 14 mm. Till 18 mm, Number of Working Rolls: 11 (5 up and 6 down) Ø 180mm,Number of Back Up Rolls: UP - 3 Rows with 6 rolls each one
DOWN - 3 Rows with 7 rolls each one
Working Speed: 10 m/min,Rolls Elevation: 2 x 18, 5 KW. AC 380 V. trifasic

Maximum Width: 144", Maximum Thickness: 1 3/4", Speed: 30 feet per minute, Five (5) Work Rolls (3 over 2), Roll Diameter: 14"(top) / 16"(bottom), Automatic Roll Adjustment, Top and Bottom Back-UP Rolls, Motors: 100HP, 75HP, 5HP

Max. width 126"
Max. material thickness: 1"
Minimum material thickness : 0.300"
Rolls diameter : 12.5"
Motor : 110HP

1986, Material (Cold): 124" Wide Max, .315" - 1.25" Thickness, 47" Length Min, Speed:  52 FPM (16 M/minute), 2 Entry Exit Deflector Rolls, 7 Leveling Rolls, 5 Driven Rolls, 18 Back-up Rolls, Main Drive Motor: 115 HP, 990 RPM, 380 Volts

Model ST-316-00096
Thickness Range: .105" - .500"

9" Diameter Entry Pinch Rolls, 9 Work Rolls - 4 over 5, 7" Diameter Work Rolls, Top & Bottom Center Back-Ups, 150 HP DC Drive with Gear Box, Drive Base & Gear Box

Year 1980, 6-Hi Design, Inverted Leveler

Thickness Range: .025" - .160" @ 60,000 PSI, .025" - .225" @ 35,000 PSI
Line Speed: 300 FPM

19 Work Rolls, 2.678" Dia Rolls, 9 Flights Top & Bottom Back-Ups, 7 Flights Motorized, Quick Open & Close, Distribution Gear Box (NEW), Entry & Exit Roll Height Adjustment Motors, Motorized Tilt, Requires: 400 HP DC Motor, Spares

4 OVER 3 PLATE FLATTENER, CAPACITY: 84" X 3/4", BOTTOM ROLLS DRIVEN, ROLLSIZE 98" X 12" DIAMETER, ENTRY BOTTOM ROLL, 3-ROLL TABLE: 5' X 8" DIAMETER, ENTRY SIDE: 6' X 6" TABLE (JACKSCREWS), EXIT SIDE: SKATEWHEELS, MOTORIZED TOP ROLL ADJUSTMENT, MOTOR: 25HP, 200/440/60/3, 440 CONTROLS

Manufacturer: Plemco
Year: 1978
Refurbished in 2008

Thickness: 4 to 10mm (S235), 2 to 6mm (S355), Work Rolls : 10 rolls of 120mm diameter + 1 Roll of 180mm, Backup Rolls: 4 Rows Up and 4 Rows Down of 120mm Diameter, Motor Power: Rolls Elevation: 2x2.2KW AC 380V Trifasic, Centralized Lubrication System, Motor Drive: 22KW at 1465 rpm, Gear Reducer, distribuitor with 10+1 Exits and Universals