Year 1987
Serial No. 26923

72" Max Coil OD
24" Coil Width

4 Arm Turnstile, Pick & Place Downlayer, 18' Powered Conveyor, Banding Table, 3 Conical Rolls, Signode Banding Head, Coil Stacker, 6 Position Turntable, Coil Push-Off, Programmable Controls

Downlayer with Right Angle Discharge, Motorized Conveyor, 79" Roll Face, 4" Diameter Rolls, Powered Conveyor Rolls

Consisting Of:

72" x 10,000# Hydraulic Downlayer with right Angle discharge, 2002, Power Conveyor, Signode Banding Head, Banding Table, 2 Conicle Rolls, Exit Conveyor, 
Overhead Monarail with ID Grab 

72" x 10,000 Downlayer, Right Angle Discharge, 80" Roll Face, 12' Powered Conveyor, Signode Banding Head Table, 3 Conical Rolls, 20' Exit Conveyor with Cut-Out for Coil ID Lift, 5 Ton Shaw Box Jib Crane with ID Coil Grab

Max Coil OD:  72", Coil Capacity:  10,000Lb, 4 Arm Entry Turnstile
40.000# Coils, Coil Horn Type Downlayer, 10,000# Coil Capacity, 8 1/2' Powered Roller Conveyor, 90 Degree Turn Powered Conveyor, Signode Banding Table, 72" Roll Face, End Stop Conveyor, 75" Roll Face, 13' Long Conveyor Section, (1/2 Split Roll Design), Cut-out for ID Lift

1997, 78" max coil O.D., 15,000 Max Coil Weight, I.D./O.D. coil grabs, dual arms, Excellent Condition.

Year:  1981

Table Specifications:

1.  Make: Signode
2.  Coil OD: 60"(1524mm)
3.  Coil Weight: 6,000 Lbs.(2 MT)
4.  2 Conical Roll Design
5.  49" Wide Rolls x 5 1/2"(139mm) Dia.
6.  Overall Table Dimensions: 70"(1778mm) L x 56"(1422mm) W
7.  32"(812mm) Passline Height
8.  Does Not Have Banding Head

60" Coil OD (66" Possible with coil overhanging slightly), 2 Powered Conical Rolls
Powered Table Rolls, 56" x 72" Table Size, Foot Pedal, Counter Weight, Signode M20SV Banding Head, Banding Dispenser, 230 Volt, 3 Phase, 60HZ, 12.7 Amp, 3HP