3" EPT-90 Tube Bending Machine

You are here

Summary

Tube & Pipe Components
Tube Outside Diameter: Max 89mm, (3.5")
Maximum Wall Thickness: Carbon or Mild Steel 2.54mm (0.10"), Stainless Steel 1.524mm (0.06")
Center Line Radius: Min.: 38.1mm1.50"), Ma

Specifications

Contact Galaxie

Call +1 (734) 727-0600 or send us an email.
Tube Outside Diameter: Max 89mm, (3.5")
Maximum Wall Thickness: Carbon or Mild Steel 2.54mm (0.10"), Stainless Steel 1.524mm (0.06")
Center Line Radius: Min.: 38.1mm1.50"), Max.: 508.0mm (20.00")
Tube Length over Mandrel: Maximum 4495mm (177")
Carriage Travel: Maximum 4495mm (175")
Center Line Height: Standard: 57mm (2.25")
Bend Arm Speed: Standard 12RPM
Plane of Bend Speed: Maximum 45 RPM
Carriage Speed: Maximum 1500mm/s (3500IPM)
Bend Angle: Maximum 187
Accuracy: Y Axis (Carriage Travel)
                   (+/- 0.13mm (+/- 0.005")
                   +/- 0.005" Plus 0.005in/ft
                   B Axis (Carriage Rotation) +/-0.10
                   C Axis ( Degree of Bend) +/-0.10
 
Repeatability: Y Axis: +/- 0.13mm (+/- 0.005"
                           B Axis: +/- 0.005
                           C Axis: +/- 0.005
Bending Power: Hydraulic
Carriage Drive and POB Drive: Brushless Servo Motor
Hydraulic Tank Capacity: 530 Liters ( 140 Gallons)
Main Electric Motor: 40 hp (30kW)
Services Required:  Electricity 480 or 550 Volts, 3 Phase, 60Hz, 100 apms
Air: 80 psi 
Water (Oil Cooler): 45 lpm @ 15 C (10gpm @ 60F)
Machine Dimensions (Approx.) : Overall Length 6.8m ( 22.4')