Model 70-A-0-200
Serial No. 7

Single Cut Die

Minster Air Clutch & Brake, 48" Rail Length, 2 Entry Guide Rolls, Ultra Count ll Digital Counter with Readouts, 20' Run Out Table, Air End Stops, Inclined Stacking Table, Die Accelerator Unit, Roller Stacking / Bundling Conveyors for Tube Packing, 2 Boxes of Tooling, Hydraulic Unit

O.D. 160"-450", Max. Wall Thickness 30mm, Two 80 KW DC Drive Motors, Pressure Sensing: Top Rolls-All, Bottom Rolls-Center; Motorized Angle Adjustment.

Diameter: 146mm - 325mm; Wall Thickness: 30mm (max); Length: 13m; Speed: 70mpm; Six (6) Straightening Rolls; Hydraulic Roll Adjustment; Two (2) DC Motors; In and Out Tables

Year 1993

Tube Diameter Range: 168.3mm - 76.3mm Dia
Strip Width: 530mm - 240mm
Max Strip Thickness: 6mm (.236") - 1.2mm (.047")
Coil Weight Capacity: 12,000 kg
Max Coil OD: 2000mm
Coil ID: 508mm

Line consists of: Entry Coil Lift/ Coil Car, Mandrel Uncoiler, Hydraulic Expansion, Sliding Base, Feed-Up Drive, 4 Leaf Mandrel, Peeler Hold Down Roll, Powered Hold Down Roll, Hydraulic Adjustment, Knife Type Peeler Blade, Double set of Pinch Rolls, 22kw DC Motor & Gear Box, Hydraulic Roll Adjustment, Shear & End Welder
Entry Strip Guides, Entry Pinch Rolls, Entry & Exit Clamping, Shear, Butt Welder

Manufacturer: MAIR RESEARCH
Year: 1991,Diameter Range: Rounds  (Min. 1/2")  (Max. 6")Squares (12x12mm)  (135x135mm)Thickness Range: 0.8mm - 5.0mm
Tube Length: 4 -10 Meters for Tubes with Thickness Less than 1.5mm
4 -12 Meters for Tubes with Thickness More Than 2.0mm,Speed: 130 m/min.
Dimension of Bundles:Square Bundles: 250mm x 200mm - 650mm x 600mm
Hexagonal Bundle: 250mm x 215mm - 700mm x 610mm

Manufacturer: Kocks
Model: RM170
Year:  New in 1991
Diameter Tub minim:  18mm ( .700")
Diameter Tub maxim: 168,3mm (6.50")
Entry Table, Exit Table, Capable to Straighten Stainless Steel Tubes, Right to Left
Power:  6  motors  of 3Kw each for traction, one per roll.
The 3 top rolls are motorized and adjustable up and down

Model 618
Serial No.: 1788
New in 1981
Right to Left Operation, Power Vertical Adjustment, Min OD Capacity: .750", Wall Thickness Range: .050 - .300 @ 75,000 PSI Yield, Speed: 80 - 250 FPM, 6-20 HP DC Motors with Individual Gearboxes, 30' Entry & Exit Tables, Spare set of Rolls,
2- New Spare Gearboxes

Year 1987, Zinc Bath new in 2003, Dust Collector & Bag House new in 2000. Twin Screw for Galvanizing 2 pipes at once, 24' Max Length, 6 Stage Pickling and Cleaning Section, Gas Fired Drying Oven, 30' Zinc Bath, 16 Gas Fired Burners. Bronx 6 Roll Straightener, 3/8" - 2" Dia. Montbaro 6 Roll Straightener, 42mm - 168mm Dia. Acid Tanks, Spent Acid tanks, Chillers, Dust Collector, Baghouse, Electrics, Hydraulics and Controls, Drawing and Manuals.

Serial# FR-20-56, Year 1980, 3½" Max. Tube Diameter, Double Cut Die, Die Acceletartor, Flying Ram, Beta Ram Push Button Panel with Readouts

Year 1982

Strip Width:  2" - 10" (50mm - 250mm)
Strip Thickness:  .040" - .150" (1.1mm - 3.8mm)
Coil OD:  48" - 78" (1200mm - 2000mm)
Coil ID:  17 1/2" - 25.5" (450mm - 650mm)
Coil Weight Capacity:  11,000 Lbs  (5000Kg)
Mill Speed:  Max 500 FPM  (150 M/Min Max)
Line Direction:  Right to Left

Complete Line With:  Double End Uncoiler, Peeler Table, Shear & End Welder
Model LSW-2500, Vertical Floop Type R320, Strip width: 10" - 2" (250mm - 50mm)
Strip Thickness: .157" -.040"(4 mm - .9mm), Motor 22Kw DC, With Controls.